I. Purpose: Use to test the indentation hardness for elastic foaming material, sucha as compounded foam, PU foam.

II. Theory: Computer software control, first press 75% of the sample thickness, release and then press 25% for 20 seconds. Load cell force sensor will automatically record and show its force. That would be the hardness of the foam. Also 40%, 65% is programable.

Standards: GB/T10807-89, ISO 2439-1980, JISK6401, ASTM D3574, AS 2282.8 Method A-IFD Test

ITI. Features:
1. Ajust speed: Adjust speed test according to different specimen.
2. Indicating value verify: System enables display the accurate calibration of force
3. Control method: Select the test force, test speed, displacement, strain etc. Test method.
4. Curve ergodic: After the test, you can find out any curve point value and transformative data and analyse it.
5. Display: Dynamic display of the data and curve test process
6. Result: The test result can be accessed. Analyse the data curve.
7. Limit: Cell-type and machinery limit.
8. Overload: Automatic shutdown when exceed the rated value...

IV. Technical parameters:
Automatic stop, stroke top and bottom limitation
Sensing method: Force sensor automatic dispaly
Load Cell Capacity: 300Kg
Motor: Servo motor control system
Unit switch: Kg, N, Lb
Resolution: 1/1000
Accuracy: 0.5 (± 0.5%)
Testing stroke: 200mm
Test speed: 25~380mm/min
Size of upper compressing plate: Diameter 203mm,
Bottom Border-radius: R1mm
Lower platform: 420mmx420mm,
Air hole diameter: 6.5mm,
Hole center gap: 20mm
Specimen size: (380+10)mmx(380+10)mmx(50± 3)mm
Volume (WxDxH) 70x42x70cm
Weight: Approx 70kg
Power: 1 AC220V 2.6A