Introduction of full automatic setting machine 

    Automatic setting machine is mainly suitable for a code to automatically pack bricks that burned in the tunnel kiln.It will be picked up automatically by marshalling brick (wet billet, dry billet) square matrix, using clamp of brick by arbitrary rotation, wet billet, dry billet shelved in the corresponding position of formulation, flexible, fast and used in any type of kiln.

The compose of full automatic setting machine

    System is mainly composed of automatic cutting machine, automatic cutter, transition marshalling billet processing system and automatic separating machine, automatic setting machine, automatic steering machine, automatic car driving system, automatic control system and hydraulic system, full automatic controlled by PLC

The advantages of full automatic setting machine

  1.Maximum output can reach 18000 ~ 22000 pieces of standard brick/h, in accordance with the differences of mud soft or hard degree and used raw materials, the product is slightly different, but the domestic same product maximum yield is less than 15000 pieces of standard brick/h.

  2.Clip billet size is from 2300 mm to 260 mm that can be applied to code standard brick and porous brick load-bearing brick. Switching to produce the type of brick that is chuck than unreplaced.

  3.Setting space entrance is equipped with infrared sensors, once someone comes into the space, setting machine immediately suspends to protect the safety of personnel.
  4.Longitudinal and lateral of marshalling system all have cracks to facilitate the drying of adobe.
  5.System has a voice alarm of steel wire breaking and wire fracture change automatic wire frame function. 
  6.It can replace the steel wire when steel wire breaks without non-stop, which increases production, and also can avoid the brick machine starting under the condition of overload, greatly reducing the number of brick machine malfunction because of excess load. Let workers who get on or off the bus replace the broken wire so that we don't need someone to guard.
  7.System is equipped with a charge out of the system, which can send automatically bad mixing back extruder, then recycling.
  8.Part demolition of bad bricks is convenient, they will link the setting machine carrier after the demolition. That is to meet the needs of user producing bricks manual setting, but also it won't delay production when setting machine has fault.
Application of full automatic setting machine 

    1.Setting machine and hydraulic pressure brick machine control connect together.

    2.Setting machine adopts the most advanced servo motor, high precision, accurate position, stable operation, automatic lubrication part, fixed time. 

    3.Setting machine has functions of automatic clip billet, carrying billet, putting billet.