Scope

 this instrument conforms to the standards GB / T11140, GB / T17040, ASTM D4294 and ASTM D2622. the instrument is suitable for the determination of trace amounts of sulfur in petroleum products. Because it uses physical analysis method, high analysis speed, no sample pretreatment, high accuracy, little artificial error, the operator labor intensity is low, no pollution, this analysis method has being widely used in the international and replace the other sulfur analysis method.

 

Features

1, the instrument uses a full English operating system, human-friendly communication interface.

2, Detection time is short, automatically detect the results within 30 seconds; automatic C / H ratio correction, which is suitable for a variety of samples;

3, Large-screen LCD display, automatically print measurement data;

4, the instrument uses the X-ray tube excitation, so that the instrument can be long-term use, without being affected by the source attenuation;

5, the instrument uses a physical analysis method, the analysis does not touch and destroy the sample, no chemical reagents;

6, the instrument uses an integrated design, easy maintenance;

 

Technical Parameters

1, Scope of analysis: analysis range can be adjusted, the user can calibrate the work curve to select the scope of the analysis.

2,Width of the analysis range: S% max-S% min≤9.999%; for example, oil: S: 0.001 ~ 9.999%.

3, Inherent error, analysis accuracy: for example, oil: in line with national standards GB / T 17040, in line with the US national standard ASTM D4294 related requirements.

4, System analysis time: 1 ~ 999 seconds, the recommended value of 60 seconds.

5, Detection limit: 10ppm

6, Use of conditions: Ambient temperature: 5 ~ +40℃,Relative humidity:≤85% (30℃),Power supply: 220V±20V, 50Hz.

7, Whole power consumption: <150W.