Product information
? Effective for both hot and cold water. 
? Contains bacteriostatic KDF55 as well as Nutshell activated carbon 
? Reduces up to 98% of chlorine 
? Reduces chemical absorption and vapor inhalation 
? Reduces 95% of water soluble heavy metals 
? Reduces damage to hair and skin 
? Eliminates foul tastes and odors 
? Reduces lime, scale, mold and fungi in showers 
5 stages of filtration: 
? 1st stage – Microfiltration: Remove sediment, rust, sand, and other solids 
? 2nd stage – KDF: Remove chlorine, hydrogen sulfide, microorganisms, scale and water-soluble heavy metals such as lead, mercury, and iron; kill bacteria and inhibit the growth of bacteria, algae, and fungi. 
? 3rd stage – Microfiltration: Separate KDF and Nutshell activated carbon 
? 4th stage – Nutshell Activated Carbon: Further remove chlorine, organic contaminants, and etc 
? 5th stage – Microfiltration: Remove the carbon grains 

 Installation
1. Remove the showerhead from the shower arm

2. Screw the EF-1503 Shower filter onto the shower arm

3. Screw the showerhead onto the EF-1503 shower filter

4.  If leaks appear tighten,reinstall or use Teflon tape

5.  Do not use with Shut-off valve

OPERATION

BEFORE ENTERING THE SHOWER

1.  Activate the filter by turning the shower-water to " full-hot''

2.  Cool to desired temperature before entering the shower. To enure over 95% free-chlorine removal. replace the model Filter Cartridge every. 6 month or 5000 gallons. Whichever comes first

MAINTENANCE

Perform the following procedures periodically in order to ensure proper filtration performance and water flow:

1.  Open by unscrewing filter housing Halves, counter clockwise

2.  Remove and reverse the EF-1503 Cartridge ,Check that the O-Rings located inside each of housing, Halves are properly seated to the O-Rings will hold them in place.)

3.  Close by screwing filter housing Halves clockwise.

4.  This procedure may be repeated as necessary

EF-1503 CARTIDGE REPLACEMENT:

Replace every 6 months according to individual water conditions by performing the following procedure:

1. Open by unscrewing filter housing Halves, counter clockwise

2. Remove and replace the used filter with the new. Check that the O-Ring located inside each of the Shower Filter housing Halves is properly seated in the O-Ring Channel.(Note: A small amount of Vaseline applied in the O-Ring Channel will hold the O-ring in place)

3. Close by screwing filter housing Halves clockwise.

REMINDER

Is designed to remind you to change the filter cartridge 6 months

1.  Use a pen to till out the installation and replacement date

2.   Peel sticker off of backing and apply to a corner of a dry mirror (or any glass surface)

Performance Data:

Shower Filter Model EF-1503

Rated Service Flow-9.5 Liters per minute/2.5 gallons per minute

Rated service Life at 95% free chlorine removal-18975 liters/5000 Gallons

Maximum working pressure-860 kilo pascals/125 pounds per square inch

Maximum operating temperature-49°Celsius/ 120 Fahenheit

Installation- Attaches to shower-arm. No Tools Required

Notes:

While testing was performed under standard laboratory condition, actual performance may vary

This system is not intended to used as a drinking water treatment unit

Both the system and installation must comply with ap