A, the five features:

1, vertical feed, directly in place.

2, mold static pressure wheel rotation, the material of centrifugal, uniformly distributed around.

3, abrasive layer, up and down dual-use, authors efficiency; Can use double again, high yield and energy saving.

4, circular mould, made to the structure, granulating chamber radiator cooling.

5, independent of the discharging device, to ensure that the particles forming rate.

B, three big differences between

1. Mold upward, unique structure, vertical feed, good for heat dissipation: mold upward, vertical feed to granulating chamber, make the material directly in place, do not need other power devices. Ring die pelletizer feeding mouth side, and the proportion of light materials into the granulating chamber is difficult, need to force the special device and uneven, and the main granulating chamber is not

Can restrain the transmission radiator cooling system (gear, bearing) of life. There are two kinds of flat die pelletizer structure,

Can the vertical feed, but there are many difficult to remove. (1) mould rotating, dynamic pressure wheel structure

Of flat die pelletizer, wriggle through the earth material easily, cause uneven feed, affect production. (2) the mold static pressure

1

Wheel rotation, not bulging, but the centrifugal force, the materials into the granulating chamber to surrounding, make granulating Kong Chao and pore distribution on the uniform plate mold center without material, cause material accumulation, uneven.

2. Mold static pressure wheel rotation, the material of centrifugal, uniformly distributed around: again through second high confining mould rebound effect, unique natural uniform distribution on the inner surface of the annular mold. General ring die pelletizer pressure wheel is static, the mould rotation, no centrifugal force, the uneven distribution of the material. And flat die pelletizer is pressure centrifugal force produced by the rotation of wheel, but the mould hole to force and material to inconsistencies.

3. The second grinding tool, the function, high efficiency, mold has a fluctuation two parts, can choose two different specifications of the aperture, produce two different specifications of the granular product. When pressing the bondability material, available with high pressure wheel and two layers of mold production to achieve the effect of four times. Any flat die, die is made.