2.5 m Horizontal Glass Washing and Drying Machine For Flat Glass Sheet in Architecture Glass Field



Quick Detail


· All stainless steel and industry aluminum profile

· Perfect waterproofness

· Pure nitrile conveyor rubber roller

· Perfect sound insulation noise reduction air blower

· Quick couping

· Nylon gear transmission drive

· 3 pairs of brush

· 3 pairs of air knife 

· Lead screw lifting

· Lighting detection

· PLC automatic control system

· Exit conveyor section with noise protection

· Top Electrical Part, includes Omron, Schneider 

· 1 year Warranty 

· Engineers available to service machinery overseas




Description:


The Glass Washing Machine is composed of feed-in part, cylindrical brush, washing part, drying part, feed out part, transmission mechanism, elevator mechanism, water-cycling system, air blower and control system. 
· Feed-in Part: This part has photoelectric sensing switch. No glass enters into the feed-in part in the specified time, drive, brush and water pump will stop working, turn off the valve of air blower ( without this function about economic level ), air blower will under clocking (this function just for high level), to achieve the effect of saving power and noise.

· Washing Part: Three pairs of cylindrical brushes, and each one high-pressure spray section before and after, every cylindrical brush and spray will be isolated. 

· Drying Part: Three pair of air knives.

· Feed-out Part: Install the inspection of daylight lamp.

· Transmission Mechanism: Install the driving of gear reducer motor, and the work life more than the triple of turbine reducer motor. The roll table will be transmission by helical gear, which is including the upper nylon gear and the below 45# steel gear. Ensure a steadier transmission and lower noise, meanwhile it is easy to maintain and change the gears.

· Elevator Mechanism: It adopts the lead screw lifting, The upper box of washing section and drying section as a whole. Meanwhile lifting 400mm and easy to cleaning and maintain.

· Water-cycling System: Every pair of cylindrical brush, cylindrical brush and spray corresponds to the water-cycling system. And it has six water tanks,  which include independent water tanks, independent water pump, independent spray pipe and independent water cycling system. 

· Air Blower: High-power of high-pressure centrifugal blower will be installed within the air blower box, which is placed on the top of rack, to save the room. 

· Control System: World-famous electrical parts, such as Omron, Schneider and LG etc.

Applications:

Glass washing machine and drying machine for flat glass sheet is the special equipment for glass processing, to clean and dry the surface of glass, before the glass former process in mirror,  vacuum coating, tempering, heat bending, composite and other deep-processing technology treatment.  It is mainly used for flat glass cleaning and drying it is an necessary equipment for glass deep processing enterprises.