Type: | Hydraulic Crimping Tools |
---|---|
Model Number: | BNT50 |
Brand Name: | BNT |
Place of Origin: | China (Mainland) |
Product name: | hydraulic hose press for fittings |
crimping ranga: | 1/4" to 2" |
operation: | manual |
oil: | NO. 46 hydraulic oil |
weight: | 200kg |
Volume of the machine: | 0.45CBM |
another name of the machine: | pressing hydraulic hose machine |
shipping terms: | FOB,CNF,CIF,DDU,DDP,etc |
stock: | yes |
Quick Details
Specifications
How to Correct a Crimping Hydraulic Hose
Crimping refers to the method used to attach fittings to the end of a hydraulic hose.
Special crimping machines can be used to ensure the ends are properly fitted to the hose.
Crimping machines can be rented or leased from crimping manufacturers.
These machines generally follow the same procedures during the crimping process.
Instructions
1
Mount the crimping machine on a workbench. Depending on the weight of the crimping machine, the workbench used must be able to support at least 136 Kilogram or more.
2
Remove the plug from the hydraulic reservoir located on the crimping machine.
3
Insert the vent cap into the reservoir. The vent cap is supplied with the unit.
4
Plug the crimping machine into a dedicated electrical circuit. Avoid using extension plugs. Instead, plug it directly into the wall.
5
Select the die cage based on the size and style of the hose. The crimping machine instruction manual will contain complete, detailed crimp specifications.
6
Load the die cage by extending the ring's length as far as it will go.
7
Use the adjustment knob at the top of the machine to determine the diameter of the crimp for each hose, fitting and die cage. The settings range between 000 and 400. Adjust the knob between these settings to the number found on the crimp setting chart. Each downward rotation increases the setting by 025. Rotate the knob downward until you reach the desired setting.
8
Press and hold the crimp switch in the upward position to insert the fitting. Toggle the switch up and down to reposition the fitting if necessary.
9
Wait for the machine to finish crimping the fitting. The machine will stop and the black guard will move up and over the red indicator ring on the adjustment knob.
10
Remove the crimp hose assembly by pressing and holding the crimp switch in the downward position. The machine will release hydraulic pressure.
11
Inspect the diameter of the crimp in the fitting and verify that it is correct.
HOW TO DO BUSINESS (hose crimping machine,cutting and skiving mahine, hydraulic hose and fittings)WITH US: