| Type: | Hydraulic Crimping Tools |
|---|---|
| Model Number: | BNT12Volt |
| Brand Name: | BNT |
| Place of Origin: | China (Mainland) |
| crimping ranga: | mobile hydraulic hose crimping machine |
| oil: | NO. 46 hydraulic oil |
| another name of the machin: | mobile hydraulic hose crimping machine |
| shipping terms: | FOB,CNF,CIF,DDU,DDP,etc |
| Payment terms: | Western Union,.t/t,lc |
| stock: | yes |
| usage: | mobile van |
| Product name: | 12 volt mobile hose swaging machine |
Quick Details
Specifications
BNT mobile hydraulic hose crimping machine
BNT 1/4" 1" (2 wires)12 volt hose swaging machine. Suitable for use in a mobile hose repair van for hydraulic hose assembly. Comes as standard with 4 sets 1/4" - 1 " (2 wire) . Additional dies can be purchased to enlarge the range of the machine up to 32mm
Why use battery crimping machine?
BNT 1/4" 1" (2 wires)12 volt hose swaging machine. Suitable for use in a mobile hose repair van for hydraulic hose assembly. Comes as standard with 4 sets 1/4" - 1 " (2 wire) . Additional dies can be purchased to enlarge the range of the machine up to 32mm
Why use battery crimping machine?
Many repair shops already own a hydraulic hose crimping machine that can crimp hydraulic hose, brake hose, a/c hose and battery cables. Hammer and lever style crimpers are portable and ideal for field repairs, while hose crimping machine can be used in the shop.
You can use our 12v hose crimping machine for workhouse hydraulic machinery repair, farm equipment, construction machinery and mining machinery repair . It can be put on mobile van, used as a repair spare part. Will be your ideal choice if outside.
Technical Data of mobile hydraulic hose crimping machine:
|
Hose ID |
4-27(mm)-2W / 1/6''~1'' |
|
Crimping Force |
150(T) |
|
Max Pressure |
20(MPa) |
|
Die Opening / Closing |
+/-20(mm) |
|
Motor power |
1.5(KW) / 2(HP) |
|
Operating Voltage |
380(220,24, 12)(V) |
|
Dies |
4(PCS) |
|
Weight |
80(Kg) |
|
Dimensions |
600x500x300(mm) |
|
Die No. and length |
16(65), 20(65), 24(65), 28(75)(mm) |
How to Correct a Crimping Hydraulic Hose
Crimping refers to the method used to attach fittings to the end of a hydraulic hose.
Special crimping machines can be used to ensure the ends are properly fitted to the hose.
Crimping machines can be rented or leased from crimping manufacturers.
These machines generally follow the same procedures during the crimping process.
Instructions1
Mount the crimping machine on a workbench. Depending on the weight of the crimping machine, the workbench used must be able to support at least 136 Kilogram or more.
2
Remove the plug from the hydraulic reservoir located on the crimping machine.
3
Insert the vent cap into the reservoir. The vent cap is supplied with the unit.
4
Plug the crimping machine into a dedicated electrical circuit. Avoid using extension plugs. Instead, plug it directly into the wall.
5
Select the die cage based on the size and style of the hose. The crimping machine instruction manual will contain complete, detailed crimp specifications.
6
Load the die cage by extending the ring's length as far as it will go.
7
Use the adjustment knob at the top of the machine to determine the diameter of the crimp for each hose, fitting and die cage. The settings range between 000 and 400. Adjust the knob between these settings to the number found on the crimp setting chart. Each downward rotation increases the setting by 025. Rotate the knob downward until you reach the desired setting.
8
Press and hold the crimp switch in the upward position to insert the fitting. Toggle the switch up and down to reposition the fitting if necessary.
9
Wait for the machine to finish crimping the fitting. The machine will stop and the black guard will move up and over the red indicator ring on the adjustment knob.