Model
Corrugated Sheet making  Machine,can do as customer's design

Product Description
This YX19-75-825 Corrugated Sheet Forming Machine is suitable for forming 0.3-0.7mm thickness PPGI and galvanized sheet. Beautiful sample and high producing speed. It is very difficult to form PPGI material thickness smaller than 0.25mm, we are successful to solve this problem and become ahead of this design.

The product produced by these series machine is used for roof or wall in building. With this product for roof and wall, it is with the advantage of lower cost, soon fixture and uneasy damaged, this series product is suitable for steel structure factory, store and public big building. It is common used in different fields.

 

Main Technical Parameters

Technical Parameter	Description
Material Thickness	0.3-0.8mm
Material Width	1000mm
Effective Width	825mm
Shaft diameter	φ75mm
Manufacture material	40Cr for rollers, H-Beam for frames
Forming Station	20 steps
Producing speed	10-20m/min
Motor power	7.5Kw
Weight	6000KG

 

Hydraulic cutting device
Pump motor =3KW; Cutting pressure=Max.8Mpa
Cutting tool material: Cr12, Heat treatment

 

PLC Control System 
Control the cutting length & quantity automatically.
Combined with: PLC, inverter, Touch Screen, Encoder, etc
Cut-to-length tolerance≤±3 mm
Control voltage 24V

 

Whole Producing Line Components
1)5tons decoiler
2)Roll forming machine
3)Hydraulic cutting device
4)Product rack for collecting products
5)PLC control box