Belt conveyor cleaner/sweeper is used for bulk material conveying equipment, such as Power companies, thermal power plant, coal mine, coal conveying line Petrochemical Industries Co, steel mills, sugar industry conveyor line, chemical transmission line, port belt conveyor line, large mixing station, large port mechanical handling etc.

     Our factory specialized in produce different kinds of conveyor belt sweeper, Belt conveyor is often easy to adhesion such as dust, mud, powder material etc material in the process of conveying material, not easy to remove during discharge, adhesive material will enter the no-load section on the lower supporting roller, the roller dirty and continue to stick with these attachments. The material enters the roller shell, thereby increasing the radial load and axial load on a bearing seat, the bearing rapid wear, even cause the roller stops or even discarded.The supporting roller shell stick on the material will tear and galling conveyor belt conveyor belt rubber, accelerated wear damage. If the adhesive into the tail turnabout drum, will stick to the surface of the cylinder, the more the more viscous, adhesion is also more and more big, the result is a belt conveyor, conveyor belt wear increased, causing serious consequences. Conveyor belt material will increase the residual friction on the drum, can sometimes cause the conveyor belt surface rubber and drum kits layer tearing. If the cleaning device is good, roller, conveyor belt and so on the service life can be prolonged.Thus, the cleaning device has a role can not be ignored in belt conveyor. In the operation, if you want to remove the tail roller human attachment, may cause serious personal injury accident. Therefore, in order to ensure the normal operation of the belt conveyer, must put on the conveyer belt attachment clean.

Belt conveyor sweeper installed at the steady working face in head near the wheel, used to clean the adhesion materials near the head wheel below.

1. Installation position: below of the head pulley, plane of the Return belt .

2. High wear resistant polyurethane blade does not damage conveyor belt.

3. PU blade is compatible with belt joint, even mechanical joint, such as belt fastener.

4. Both one-piece pu blade and alloy pu blade are available.