Electric Flange Immersion Water Heater, 380V 20KW

Characteristics & Properties  

• Tube diameter: Φ4mm-Φ30mm
• Tube Material: SS304, SS316, SS321 and NICOLOY800 etc
• Insulation Material: High-purity MgO
• Conductor Material: Ni-Cr or Fe-Cr-Al Resistance Heating Wire
• Wattage density: high/middle/low (5-25w/cm2)
• Lead Connection Option: Crimped or Swaged leads
• Lead wire type: 10" Standard (Teflon/silicone high temperature fiberglass)

 

Heat intensity	Not exceeding 30w/cm2 (advisable)
Power	Depends on the dimension
Exhaust extreme (when cold)	<=0.1mA to 242 v.
Insulation (when cold)	5 Min Ohms 500 Watts minimum
Dielectric strength	1500v. 1/sec
Working temperature	750 Deg C max.
Length tolerance	+/-1.5%
Diameter tolerance	-0.02 to -0.06 mm
Cut off connection tolerance	+/-15 mm
Power tolerance (w)	+5 % - 10 %
Cold areas	Depends on length and diameter 5-25mm

 

 

Suggested Applications

• Liquid Immersion 
• Plastic Molds 
• Dies 
• Labeling 
• Medical Equipment
• Platens 
• Packaging Equipment 
• Hot Stamping 
• Sealing 
• Injection Molding 

 

To Order

 

To custom Electric Flange Immersion Heater, Shapes, Watts and Voltages are available on request.

 

Please contact us with your special requirements. We are pleased to contact you if you would like more information or want to discuss custom product availability and pricing.