Technique parameters:
Specification and size of heater: to be customized as required
Heater material: copper, SUS430, SUS304, cast aluminum, cast copper, ceramic
Input power: to be customized as required
Characteristics:
Applying imported raw materials to ensure operation conditions of components under higher temperatures
Using special manufacturing processes to enhance the heat radiation effect for components
Good electric performance to meet the safety requirements of equipment
Taking the lead in manufacturing processes in the electric heating industry to ensure the longer service life of electric heating parts and components
Note:
Working voltage no higher than rated voltage by 10%
Environment humility should be no higher by 95%
Wiring part should be placed outside the heating layer and warming layer
Cover should connect floor correctly
Avoid connecting the corrupted and exploded medium and water for long
Conducting wire can stand part of the connecting wire temperature
Avoid screwing too strong
Casting heater should be put in dry environment
Please check it again before it is used to make sure it's safe
If the casting part heater is storage for a long time, please make sure the insulation resistance lower than 1MΩ
Make sure to bake it in stove around 200° for 5 to 6 hours before being used again, or we can lower the voltage and heat it until the insulated resistance become normal
Please fix the aluminum casting panel and make sure it is connected with the heated part closely to avoid air burning
