Get Skid Steer Tracks For Winter Weather

Skid steer tracks mean traffic and safety in the winter. Winter weather means slippery streets, driveways, walkways, and parking lots. Anywhere that cars, trucks, and humans need to go will inevitably get some snow and ice. Once a skid steer owner knows what the weather is going to dish out, it is just a matter of choosing the best skid steer attachments, and choosing the best skid steer tracks.

When choosing a set of skid steer tracks, it is a good idea to get acquainted with the different types, and what they are used for. There are essentially two types of skid steer tracks available: steel, and rubber/urethane. Each has its pros and cons, and just as in warm weather, among these will be the type that works best for the jobs set up this Winter. Each type mentioned in this article is an OTT, or over-the-tire track set. These can be installed and removed fairly easily, and has the added benefit of retaining the use of skid steer tires when the job calls for them.

STEEL Steel skid steer tracks offer the most grip. These skid steer tracks come with individual bar links, and as such, steel tracks find their way deep into the wet slush, deep snow and muddy soil, and can get even the largest skid steer out of the slickest predicaments. The skid steer does its best work in the tightest spots where conventional trucks, tractors, and machinery cannot go.

But steel skid steer tracks, for the very same reasons, cause the most damage to terrain. So they might not be the best choice when plowing snow or working in residential areas where the lawns and drives might be obscured by snowy drifts. Some steel tracks are built around a deep-set bar track for use in the most severe conditions.

These will pull a skid steer up and out of the toughest conditions. But beware. A skid steer wearing a set of these will completely tear up the sod below the snow even in a straight line, and they will score, scratch, and can even break the surfaces of driveways, lots, and sidewalks. Steel skid steer tracks definitely offer the most grip, but these skid steer tracks must only be used where necessary.

STAMPED STEEL Stamped steel skid steer tracks are flat profile tracks that are perfect for providing maximum grip in established yards. They are general, all-purpose landscaping tracks that a skid steer owner can fit to the machine without worrying about tearing up grass and dirt beneath the snow drifts, and without worrying about crossing over concrete driveways and walkways.

Stamped steel tracks will leave a mark, but will not damage the hard surface. Avoid spinning, and the profile on the stamped skid steer tracks is such that they will grip without tearing, even on new sod.

RUBBER In the mud, slush and snow, rubber OTT tracks for the skid steer offer a truly enhanced tracking experience over the standard skid steer wheel-set. They still allow for the perfect pivoting that the skid steer is famous for, and are sufficient to handle slick, snowy, and even hilly conditions. They are not as aggressive as their steel counterparts, but are also less expensive.

They are also more gentle on the ground beneath the snow. For a finished home with concrete walks and a driveway, certainly avoid the use of steel tracks. Rubber tracks that can be added to your skid steer machine are a smart choice.

This winter, the skid steer need not be put away awaiting warm weather. With the right set of OTT skid steer tracks), the coldest part of the year might be the best.
 

Our product is prepared with multiple special rubber and natural rubber, so it possesses very good properties of wear resistance, tear resistance and non-disintegration, etc.We have exported to almost all of the world, such as Spain, Singapore, Japan, South Africa, Chile, Australia and so on.  If you're interested in our products, welcome to contact me and I will reply you as soon as possible. Looking forward to being your realiable and strategic parterner.