FME (For Mobile Equipment) is a miniature 50Ω RF connector series offering excellent performance from DCto 2.0 GHzused primarily with RG-58or equivalent coaxial cables employed in mobile applications and installations.

The FME female is designed to allow cables it has been installed on to be snaked through the often tight access holes or spaces of a vehicle to the desired equipment location(s) where an FME male adapter to the required equipment connector series is fitted to the female cable connector.

• Applications:
  • Antennas, base station, broad cast, cable assembly, cellular,components, instrumentation
  • microwave radio, PCs, radar, radios, surge protection,WLAN
• Note:
  • These characteristics are typical but may not apply to allconnectors
  • Special specifications (datasheet) for each model based as percustomer's request
• Specifications:
• Typical frequency range: DC to 3GHz
• Impedance: 50ohm and 75 ohm
• VSWR: d1.50 at 3GHz DC
• Dielectric withstanding voltage: e1,000V RMS, 50Hz, at sealevel
• Dielectric resistance: e5,000M©
• Contact resistance center: d1.5m©
• Outer contact: d1.0m©
• Mating: e500 cycles
• Materials:
• Body: brass nickel-plated
• Sub-assembly: brass nickel-plated
• Insulator: PTFE (Teflon)
• Outer conductor: brass nickel-plated
• Inner conductor: beryllium copper
• Ferrule: annealed copper Ni
• Coupling nut: brass
• Gasket: silicone rubber

• Operating temperature range: -40 to +85°C
• RoHS Directive-compliant

We are a leading professional connector company,main products as blow:

RF coaxial connectors :SMA,MMCX, MCX, TNC, F, BNC ,N, 7/16,UHF ,FME ,PAL,SMB and so on.

Cable Assembly :interface cables with U.FL, H.FL, IPEX, SMA, SMB, MCX, N, MMCX connector and so on.

Antenna :GPS antenna, WiFi antenna, GSM antenna, DVB-T antenna, GPS/GSM , combination antenna, GPS engineer board