Portable Duct Rodder for Handy Carry in Cable Pulling

Portable duct rodder shows good performance in wire or cable pulling in pipes, conduits or ducts. Without wheels, it is easy to carry or put in the boot of the car. Generally, when the pulling rod diameter is below 10mm (including 10mm), there is a portable duct rodder needed. And some portable duct rodders are not equipped with a hand operated brake on the frame.

Portable duct rodder with totally enclosed handle

Portable duct rodder with totally enclosed handle is designed for good protection of the pulling rod (See Figure 1).

Portable duct rodder with semi-closed handle

Some portable duct rodders are designed with semi-closed handle for light weight (See Figure 2).

Portable duct rodder with bushing handle

Bushing handle of duct rodder is for reducing pressure on the hand who carries it. The grip is very important to the duct rodder (See Figure 3).

Portable duct rodder specification sheet is listed below.

Portable Duct Rodder Specification

Item	Rod diameter	Bend radius	Rod length	Conduit diameter	Frame size
PDR - 4	4mm	100mm	50m - 300m	1cm - 3cm	40cm × 50cm × 16cm; 84cm × 94cm × 50cm; 109cm × 112cm × 50cm
PDR - 5	5mm	100mm	50m - 300m	2cm - 3.2cm	45cm × 50cm × 16cm; 60cm × 75cm × 17cm
PDR - 6	6mm	100mm	90m - 300m	2.5cm - 7.6cm	71cm × 81cm × 24cm; 61cm × 72cm × 28cm
PDR - 8	8mm	150mm	150m - 350m	4cm - 9cm	110cm × 120cm × 40cm
PDR - 10	10mm	178mm	90m - 365m	7.5cm - 14cm	71cm × 81cm × 33cm; 87cm × 92cm × 40cm; 120cm × 130cm × 45cm

Note: other sizes can be ordered as customers' demand.