Polyurethane Sealant for Car Glass (RENZ 30)

1. Technical Data Sheet:
Testing items Performance
Appearance black, homogeneous paste
Density (g/cm3) 1.25+/-0.05
Touch Dry time (min) 20~60
Curing speed (mm/d) 3~5
Volatile content (%) ≤ 4
Shore A hardness(A) 55+/-5
Tensile strength( Mpa) ≥ 8.0
Elongation at break (%) ≥ 450
Extrudability (g/min) 60
Application temperature (C) +5~+35
Shelf life(month) 9

2. DESCRIPTION:
Renz 30 is one component high quality polyurethane sealant for car manufactory and aftermarket, it cures by reaction with atmospheric moisture to form a durable and weathering resistant elastomer, Renz-60 is manufactured in accordance with the ISO/TS 16949: 2002.

3. USES:
Suitable for automobile windshield and side glass installing.
Suitable for car body structural bonding and sealing.
Suggest to use primer

4. ADVANTAGES:
*One-component formulation, excellent smooth appearance.
*High adhesion strength, modest Hardness after curing. -
*Durable and excellent extrudability.
*No sagging, no pollution and corrosion to base material and environment.
*Excellent sealing and adhesion performance, excellent water and aging resistance.
*Can be painted.

5. ADVICE
*Surfaces must be clean, dry and free from grease, oil and dust. The surfaces must be treated with a cleaning or activating agent and primed with the appropriate primer.
*Please construct by application instructions strictly, failure of stickiness may be caused by any
Operation disobeying construction techniques.
*This product is innocuous after curing completely, but before set, please avoids contacting with eyes and skin. In case of eyes and skin contact, wash immediately and thoroughly with soap and water. See doctor immediately if it is serious.