Commercial plywood
1)Size:1220*2440mm
2)Thickness:2.5-30mm  
3) Face and back:Okoume,Bintangor,Pine,Birch according to customers
4)Moisture:10-16%
5)Thickness:+-0.2-0.5mm
6) Market:Asia, Middle East, Africa, Europe, Latin America, Ect.
7)Delivery time: within 15days after receiving prepay or against origin L/C
Welcome to you enquriy!

Product introduction

         Luowen Plywood Formwork is mainly made up of eucalyptus plywood, poplar plywood or eucalyptus and poplar plywood, it is economic and practical for the construction concrete pouring, for it could be the face panel for any formwork system, for example, steel frame formwork system, single side formwork system, timber beam formwork system, steel props formwork system, scaffolding formwork system, etc.

 

Product features

1. Light Weight: We choose the high grade eucalyptus and poplar as the basic material, they are very light, so Luowen Plywood Formwork is convenient for transporting, and only one person could delivery single formwork by hand.
2. Easy To Cut: the plywood is easy to cut, so according to the construction, the formwork could be cut into the required size.
3. Re-used: Luowen Plywood Formwork could be used 8-10 times.
4.Multi Using: Luowen Plywood Formwork could be used for wall, slab, column, beam and bridge concrete pouring etc..
5. No Deformation: Luowen Plywood Formwork is also whole but not deformation and chipping after 72 hours cooking in boiling water.
6. High Quality Film: Luowen Plywood Formwork is filmed by Dynea brown or black film imported from Finland, it protect the formwork surface from the corrosion and makes the formwork durable, improves the flatness of the concrete surface and makes the concrete surface save the second time plastering, so it could save a lot cost of construction. 

 

Detailed parameters

Material	Eucalyptus/Poplar/Eucalyptus and Poplar
Size	1220*2440mm/ 1250*2500mm/ 1250*2501mm/ 1250*2502mm/ 1250*2503mm 1250*2500(+10)mm/610*2440(/2+1)mm/1200*1800(+2)mm/1220*2500(+4)mm 610*2440mm/ 1200*1800mm/ 1220*2500mm
Thickness Tolerance	0.5mm
Width & Length Tolerance	2.0mm
Diagonal Allowance	Max. 3.0mm
Film	Dynea brown or black film imported from Finland
Glue	WBP, MR, Melamine
Moisture Contents	Less than 10%
Reuse Time	8-10times