Brand Name: | TS |
---|---|
Model Number: | TS1103 |
Alloy Or Not: | Non-alloy |
Usage: | applied in refractory industry etc |
Length: | optional |
Surface Treatment: | Brushed |
Place of Origin: | China (Mainland) |
material: | alumnum titanate |
Quick Details
Specifications
Specifications:
Chemical competent |
Al2O3 |
≥85% |
SiO2 |
<12% |
|
Fe2O3 |
<0.5% |
|
Alkaline matter |
<2.5% |
|
Density |
2.6 g/cm3 |
|
Hardness |
7 M |
|
Water absorption |
<0.2% |
|
Rupture strength |
>1300kg/cm2 |
|
Gas tightness |
Kept for ten minutes at negative pressure of 1.3Kpa. The pressure drop is less than 0.3Kpa. |
|
Heat tolerance |
Insert the pipe into the furnace at a depth of 20mm. Heat to 1600oC and maintain for 30 minutes. |
|
Alkali tolerance |
In the Na2CO3 solution of 2N concentration, boil for 15 hours with the weight loss not greater than 20mg/dm2. |
|
Volume resistance |
>2*10(5) Ω·cm/1300oC |
|
Breakdown voltage |
18kv/cm |
|
Expansion coefficient |
5*10(-8) |
|
Temperature for use |
Long-term: 1400oC Short-term: 1600oC |
|
Chill and abrupt heat |
1300oC~room temperature not cracking thrice. |
Application:
Abrasion resistant ceramic linings mainly include elbows, straight pipes, tees, reducer pipes, etc, and they are used for ceramic lined pipework and of pneumatic conveying and slurry pumping. The conveying medium is featured by high hardness, fast and big flow, alumina ceramic rings can effectively reduce the speed of wearing through by continuous impact, abrasion and corrosion to pipe wall when long-term conveying medium.
Wear is fast when the piping conveying pointed materials(ash, coal powder, mine flavor powder, tailings, cement etc), especially for elbow. Pipeline corroded will be quickly worn out when conveying gas, fluid and solid materials of intensive corrosion.
We are always here at your service.