| Type: | Roller |
|---|---|
| Structure: | Other Structure |
| Place of Origin: | China (Mainland) |
| Number of Row: | Single Row |
| Seals Type: | None |
| Precision Rating: | P0 |
| Model Number: | FSO400 |
| Outside Diameter: | 89 mm |
| Bore Size: | 30 mm |
| Brand Name: | TMP |
Quick Details
Specifications
| FSO400 One Way Clutches Sprag Type (30.15x88.9x68.26mm) One Way Bearings Stieber bearing supported Freewheel Clutch | |||||||||||||
| A . One Way Clutches Sprag Type Parameters | |||||||||||||
| Brand- | TMP | ||||||||||||
| Model number- | FSO400 | ||||||||||||
| Inner ring(mm)- | 30.15 | ||||||||||||
| Outer ring(mm)- | 88.9 | ||||||||||||
| Width(mm)- | 68.26 | ||||||||||||
| Weight(Kg)- | |||||||||||||
| Drag torque(Nm)- | 407 | ||||||||||||
| Materials- | GCR15 | ||||||||||||
| Series- | FSO | ||||||||||||
| Lubrication type- | Grease/oil | ||||||||||||
| Clutch type- | Sprag | ||||||||||||
| Precision- | P0 | ||||||||||||
| Structure- | Types FSO are sprag type freewheels self-contained, sealed and bearing supported, using two ball bearings. | ||||||||||||
| B . FSO400 One Way Clutches Sprag Type Specification Sheet | |||||||||||||
|
Model Number |
Torque Drag(Nm) |
Overrunning speeds(r/min) |
Diameter(mm) | G | |||||||||
|
Inner Race |
Outer Race |
A | B | C | D | E | S | H | Num | Holes | Depth | ||
| FSO400 | 407 | 2800 | 850 | 68.26 | 88.9 | 69.85 | 30.15 | 73.02 | - | 1.58×45° | 4 | M8 | 16 |
| C . FSO Series One Way Clutches Sprag Type Details | |||||||||||||
| Product Features |
One Way Clutches Sprag Type mainly used as Backstop clutches(Most suitable as backstops, and mostly the contact-free versions); Backstop clutches:The freewheel allows rotation in one direction only. It overruns continuously during operation. The freewheel prevents reverse rotation if the drive is disconnected. |
||||||||||||
| Series Introduction |
Types FS, FSO, and HPI 300 to 1027 are sprag type freewheels self-contained, sealed and bearing supported, using two ball bearings.Units are delivered oil or grease lubricated accordingto the type. It is a Formsprag USA design that uses tall sprags with multi-radius active surfaces. Designed specially for large size freewheels to compensate for any eccentricity due to bearing wear. Types FS and HPI are oil lubricated and use standard shaft lip seals. Type FSO isgrease lubricated and equipped with special grease seals. Type HPI is specially designed for high speed indexing applications. Each of the different models show a range of standard metric bore diameters. We can supply any bore size between the minimum and maximum specified in the table, including imperial sizes. |
||||||||||||
| Series Model No. | FSO300 FSO400 FSO500 FSO600 FSO700 FSO750 FSO800 FSO900 FSO1027 | ||||||||||||
| Applications |
Reducers , Flender Gearbox ,SEW Gearbox; Overrunning clutch: for multiple-machine drives or to separate the inertia of masses of a driven machine from the driving machine after it has been switched off. Indexing clutch: which turns a shaft step by step, thus achieving indexed material feed or a variable speed. Backstop clutch: to prevent a machine shaft turning backwards. In this case the overrunning clutch acts as a brake. |
||||||||||||