Specifications Power transformer
1) dry type power transformer
2) 6mva 6 mva dry type power transformer
3) epoxy cast resin and dry type

6mva 6 mva 11kv 33kv 3 phase epoxy cast resin dry type power transformer 

    

Dry type power transformer

       The  dry type power transformer cast under vaccum with epoxy resin,can be equiped with  temperature controller,fans,encloser,etc. As per users' requirements.

       The winding material is Aluminum or Copper ,there's a gas duct inside,and having high heat radiating and over-load ability. It has good mechanical properties, is free of crack and inner bubble and has low local discharge, high reliability, and long service life .

       Our transformer is explosion-proof ,hard to flame, and no environmental pollution. Small in volume, light in weight, safe in running and free of maintenance.

       SHENDA ELECTRIC is always dedicated to providing high quality dry type power transformer and best service for you,corporating with you,believe in that we will become your best reliance

 

?Main Technical Parameters for 10kV SC(B) -30-2500 type 3 phase cast resin

dry type power transformer

 

Rated power (kVA)	High Voltage (kV)	H.V Tap range	Low Voltage (kV)	Connection Symbol	Short-Circuit Impedance (%)	No-load Loss (W)		On-Load Loss (W)		No-load Current (%)	Insulation Class	Noise (dB)	Weight (kg)	Overall dimension(mm)			Gauge (mm)
						SC(B) 9	SC(B) 10	SC(B) 9	SC(B) 10					L	W	H
30	6 6.3 10 10.5 11	±5% OR ±2×2.5%	0.4	Yyn0 Dyn11	4	220	190	750	710	2.3	F	40	330	990	660	760	550×550
50						310	270	1060	1000	2.2		40	360	1000	660	790	550×550
80						420	370	1460	1380	1.7		40	470	1050	660	820	550×550
100						450	400	1670	1570	1.7		40	520	1080	660	860	550×550
125						530	470	1960	1850	1.5		41	620	1120	760	900	660×660
160						610	540	2250	2130	1.5		42	790	1200	760	950	660×660
200						700	620	2680	2530	1.3		42	880	1240	820	1100	660×720
250						810	720	2920	2760	1.3		44	1000	1100	820	1160	660×720
315						990	880	3670	3470	1.1		46	1120	1110	820	1240	660×720
400						1100	980	4220	3990	1.1		46	1360	1130	820	1360	660×720
500						1310	1160	5170	4880	1.1		47	1460	1140	820	1430	660×720
630						1510	1340	6220	5880	0.9		47	1530	1280	820	1350	660×720
630					6	1460	1300	6310	5960	0.9		47	1570	1280	820	1300	660×720
800						1710	1520	7360	6960	0.9		48	1850	1290	820	1430	660×720
1000						1990	1770	8610	8130	0.9		48	2320	1420	960	1480	820×910
1250						2350	2090	10260	9690	0.9		49	2690	1430	960	1620	820×910
1600						2760	2450	12400	11730	0.9		50	3130	1460	960	1750	1070×910
2000						3400	3050	15300	14450	0.7		52	3600	1900	1255	1940	1070×1205
2500						4000	3600	18180	17170	0.7		55	4560	2030	1255	2020	1070×1205
Note: All listed parameters just for your reference, the final data will be based on the drawing of our products,meanwhile they can be adjusted as per customers' requirement.