DC-4Q Braking-Reversible, PWM series DC Drive, has quickly dynamic response,smooth operating, works well and perfect functions.
PULSE WIDTH MODULATION
Motor runs quieter, with greater efficiency and less maintenance, longer life.
FOUR QUADRANT REGENERATIVE OPERATION
REGENERATIVE BRAKING
No contactors required. No electromechanical components to overheat or wear out. ENABLE / BRAKE / DIRECTION TERMINALS
Choose a function by simply opening or closing a dry contact or through an open
collector transistor.
STATUS LEDs
Power and Fault LEDs provide a visual status of the drive.
Forward and reverse can be set separately
Output current can be set
Braking current can be set
Torque compensation function
Standard analog control mode:
Analog:0-5V or potentiometer
OVER TEMPERATURE PROTECTION
Drive will fold the output power back to prevent from overheating. Drive will fault if it
still remains too hot.
Technical parameters:
﹡ Soft start time: 0.2—20S
﹡ Soft stop time: 0.2—20S
﹡ Analog control signal: 0—5V (wired to earth ground)
﹡ Signal input impedance ≥200K
﹡ Speed accuracy: 1%
﹡ Speed adjustable range : 100:1
﹡ Speed Ratio: 1:80
﹡ Ambient temperature: 0℃- 50℃
﹡ Relative Humidity: Below dew point