1. Brief introduction of sawdust pellet machine

Our vertical flat die pellet machine mainly used to press the wood shaving, corn stalk, cotton stalk, peanut shell, bamboo 
powder,empty fruit bunches(EFB) and palm kernel shell( PKS), etc into pellet.This machine with compact structure, easy and stable operation, continuous working.The pressed pellet with the features of high density, high combustion 
value, low moisture content and low ash content, etc.

1). Materials to be crushed under 5mm, moisture can be about 10%. In this situation, you may need a special crusher
according to different materials. Such as straw crusher, wood crusher or grass crusher or wood chipper crusher. If
moisture is large, you need to decrease the moisture below 10%.
2). If your material is high oil content material, such as palm shell, it should be crushed at under 5mm size then mixed with
sawdust or other materials.

2. Features of sawdust pellet machine 

A. The rollers adopt cone structure to make the two ends consistent with the inside and outside coil of mold. The roller will not dislocation with the mold and rub with each other.To some extent, it reduced the resistance and energy consumption and extended the mold's working life.

B. Wide application and excellent press effect.

C. The rollers with wear-resistant structure. 

D. Stable running and with high working efficiency.

E. It adopt high pressure filter lubrication system.

3. Technical parameters of sawdust pellet machine