2015 Environmental Protection Continuous Carbonization furnace/coconut shell carbonization stove

Part one: Brief introduction of coconut shell carbonization stove
This coconut shell carbonization stove is mainly used for carbonizing sawdust, rice husk, peanut shell, straw, wood chips
and grinded coconut shell, etc.
The raw material size should be less than 15mm;
Diameter of inside pipes: 377mm;
Length of inside pipes: 5500mm;
This machine is continuous getting charcoal and feeding raw material at the same time. it with high efficiency and
environmental friendly which cause no pollution to the air.

During the production process, carbonization start carbonizing when the temperature reach to 260-600 degrees celsius
inner the furnace, the highest temperature can reach to 800-900 degrees celsius. Temperature could be regulated and
controlled by control cabinet. 

Part two: Features of coconut shell carbonization stove
1. Continue working, one side to feed sawdust one side to get charcoal 
2. High capacity, one machine can get output 500Kg-700Kg/h.
3. Energy saving, it use smoke as power and also no smoke go out.
4. Operation: It is easy to operate by a manual automatic dual-use electric control cabinet 
5. Continuous working for 24 hours 
6.During the processing, it can generate carbon monoxide, methane, oxygen and other recyclable combustible gas, which
can be purified and circulate combustion. It is energy-saving. 

Part three: Technical parameters

Model	Power(Kw)	Capacity(Kg/h)
LXS-500	18.5	500
LXS-700	18.5	700

Part four: Production line details of rice husk carbonization furnace
A. Gasfier equipment
Gasfier equipment can produce gas by heating sawdust, wood wastes and coal. The produced gas will be used for
heating the raw material inside the carbonization stove untill the raw material can spontaneous combustion.
B. Dust removal device
After the raw material burning, it has much dust in the gas. The dust removal device will remove the dust by the recycling
water.
C. Condenser
Some hot-burning gas will soluble in water, you will get clean gas for heating, also will not pollute the environment.
D. The screw conveyor will transport the raw material to the carbonization stove. The feeding speed is adjustable
according to your raw material moisture. The working life for the screw conveyor is 7 years.
E. Carbonization stove
It can carbonize the raw material to charcoal directly. The capacity for charcoal can be 500Kg/h and 700Kg/h.
F. Cooling and charcoal discharge
Cooling discharging machine will cool the charcoal when discharging. When the charcoal comes out, the temperature
will be about 20-30 degree.
G. Automatic control cabinet
To control the whole system. It is very easy to operate.

Part five:  FAQ
1. What's your business model? Trading company or direct manufacturer?
We are direct manufacturer with 25 years experience. All the machines are manufactureed by ourselves. We have an
integrated system on product produce, quality control, logistics and after sale service.


2. What's the carbonization rate?
The spoilage rate: 2.5:1; Which means 2.5t raw material can get 1t carbonized charcoal.

3. Why it is no pollution during coconut shell carbonization stove production?
Smoking purification system are used for purify the smoking( Can not burning) and filter the wood tar. The smoke through
the purification system will become water vapor and it will not pollute the air.

4. Can we visit your factory and use your continuous carbonization furnace do the test?
Yes. Our technician can do the test for you and you can see the whole working principle clearly.