Feature:

1. High quality,

2. Large capacity,

3. ODM color.

Sales point:

1. Low cost

2. Environment.


Point:

1. Coal rod extrusion machines widely use the helical runner to propel the coal powder put pressure to make them be all kinds of shape and model that you want.

2. The working principle is using the dynamo driver to reduction gear and then passing on the coal rod extrusion machine. Our coal rod extrusion machines consist of spindle, speed reducer, connecting shaft, bearing pedestal, simplified, steel bushing and the nose. Spindle is supported by the bearing set up the bearing pedestal and is connected by the connecting shaft and the speed reducer.

3. There is an impeller on the spindle front, the nose is connected with the barrel through the steel reducer, and there is a hopper in the upside of the barrel. The cross section of the spindle front is the square with rounded corners, and the front of the main shaft middle set exist a self-aligning roller bearing, the back of the set have a thrust ball bearing and deep groove ball bearing.

4. It mainly change the six-party cross section of the original spindle to square with rounded corners, and the distribution of the bearing are improved, which greatly improve spindle strength index, especially the coefficient of cross section and section modulus are improved, bearing distribution way of improvement, the bearing stress at work more hasten is reasonable, greatly extend the service life of the spindle, making coal rods machine improve the overall quality.

Product features:

1. The structure is simple, mainly use the existing standard parts assembled.

2. Smooth operation; Low noises; Wear small; Long service life.

3. The high output, low energy consumption.

Welcome to visit our factory at your free time.