General

An automatic fire alarm system–typically made up of smoke detectors, heat detectors, manual pull stations, audible warning devices, and a fire alarm control with remote notification capability–can provide early warning of a developing fire.

Such a system, however, does not assure protection against property damage or loss of life resulting from a fire.

The CK1004 is The Fire Alarm Control Panel, which uses conventional input devices.  The panel accepts water flow devices, two-wire smoke detectors, four-wire smoke detectors, pull stations and other normally-open contact devices. Outputs include four Notification Appliance Circuits (NAC, SOUND1-4), three standard Form-A relays (alarm, trouble and supervisory) and an EIA-485 port to interface with remote annunciators and optional remote relay modules. The FACP is field programmable via the panel keypad.  It also supervises all wiring, AC voltage and battery level.

Conventional Fire Alarm Control Panel with four Zones
Four Style B (Class B) Initiating Device Circuits (IDCs). 
All zones accept two-wire smoke detectors and any normally-open contact devices. 
One built-in, Style Y (Class B) Notification Appliance (Signal) Circuits (NACs). 
Alarm, Trouble and Supervisory, Form-C relays standard. 
24-volt operation. 
Resettable four-wire smoke detector power @ 500 mA. 
Non-resettable power @ 500 mA. 
One-man walk-test programmable for silent or audible test. 
Disable/Enable control per IDC. 
Reverse polarity protection. 
 4 Zone, 1 Sound Output Conventional Fire Alarm Control Panel;
Package Size:420x180x170mm, 1 set/1 carton.  Gross Weight: 6.8Kg.