Company Index on m.ecvv.com

Extruder with Hydraulic Pressure Opening Barrel

Main characteristic:

1. Hand hydraulic pressure barrel; Easy to change color and cleaning

2. Three zone PID temperature control accuracy ±1°C

3. Cooling water system inside the screw

4. Separately cooling water system in barrel No. 3 zone to avoid block water passage

5. Feeding area has permanent magnetic metal remover

6. Gear box equipped with water cooling system

7. Gear box equipped with lubricating system

8. Extruder noise lower than ≤80dB

Main Technical characteristic:

1.The changing during moving gap is zero

2. High disperse efficiency

3. Self-cleaning system

4. Double temperature PID control, control accuracy ±2°C

5. Barrel equipped with soft water recycle automatic cooling system

6. Low noise and high secure gear box system

7. Equipped with permanent magnetic iron remover

8. Low material consumption, electricity and material rate kg/h.kw is higher

Main Technical Parameter:

Model	SFJ-46A or B	SFJ-55A or G	SFJ-64A or G	SFJ-80G
Screw diameter(mm)	46	55	64	80
Length-diameter(L/D)	14:1	16:1	15:1	15:1
Capacity(Kg/H)	100~180 or 100~280	300~400	400~500	600~800
Screw motor power(kw)	15, 6 or 22, 4	30	45	55
Feeding motor power(kw)	0.37	0.37	0.55	0.55
Heating power(kw)	0.75*4	0.75*6	15+0.751	25+1.51
Mixing motor power(kw)	-	0.37	0.37	0.37
Screw speed(rpm)	0~500/0~800	0~500	0~500	0~500
Temperature control system	±2°C Double temperature PID auto-control. Accuracy ±2
Speed adjust system	Adjustable speed by means of frequency inverter
Feeding system	Variable by means of frequency inverter
Cooling system	Water cooled
Equipped with	Screw feeding
Equipped with	Permanent strong-magnetic device
Overall dimension(mm)		26509001900	29009002000	36009502260