Concrete Block Anchor

Name	Hollow Concrete Block Anchors with Four Clips
Place of Origin	Yongnian, Hebei, China
Size	M6-M16 or non-standard as request&design
Length	50mm-150mm or non-standard as request&design
Grade	4.8, 6.8, 8.8, 10.9, 12.9
Standards	GB, DIN, ISO, ANSI/ASTM, B7, BS, JIS etc
Material	Q235, 45#, 40Cr, 20Mntib, etc
Surface	Plain, black, galvanized, HDG, YZP etc
Delivery	Within 15 days after confirm the order.
Package	Carton/pallet or according to requirement
Payment	L/C or T/T (30% in advance and 70% against the copy of BL)
Non-standards	OEM is available if you provide a drawing or sample.
Samples	Samples are free.
Website

Installation Process:

1. Using a hammer drill and a properly sized carbide tipped drill bit, drill a hole in the base material.

2. Clean out hole of all debris.

3. Insert the anchor through the hole in the fixture and into the hole in the base material.

4. Using a hammer, hit the nail into the hammer drive anchor until the head is flush with the top of the anchor.