Plastic Antistatic Agent BT-103
1. Ingredients and Features
Type: nonionic surfactant.
Features: greatly reduce the surface resistance of plastic products to10 8-9 ,high-efficiency
and permanent antistatic performance, appropriate compatibility with resin and no effect on
process and use performances of products, soluble in organic solvents such as alcohol,
propanone, chloroform, etc.
Items  Specification
Appearance  white or yellowish granule or powder
Effective Matter Content  99%
Amine Value  60-80mgKOH/g
Melting Point  50℃
Decomposing Temperature  300℃
Toxicity  LD 50 >5000mg/kg (acute toxicity test for mice)
2. Uses
It is inter-addition-type antistatic agent applicable for polyalkene plastic and nylon products to
produce antistatic macromolecular materials such as the PE and PP film, slice, container and
packing bag(box), mine-used double-anti plastic net belt, nylon shuttle and polypropylene
fibre, etc.
3. Usage and Use Level
It can be directly added into resin. Better uniformity and effect are achieved if preparing
antistatic master batch in advance, then mixing with blank resin. Decide appropriate use level
according to the kind of resin, process condition, product form and antistatic degree. The
usual use level is 0.3-1.5% of product.
4. Package
kraft paper-plastic film composite bag lined with polyethylene bag, net weight: 20kg/bag; or
corrugated container, polyethylene small bag inside, net weight: 25kg/box.
5. Storage and Transportation
Prevent from water, moisture and insolation, timely tighten bag if the product is not
used up. It is non-dangerous product, can be transported and stored according to the
requirement of ordinary chemicals. The period of validity is one year.