YGM High Pressure Suspension Mill

YGM high pressure suspension mill is on the basis of Raymond mill innovation and transformation of the overpressure milling equipment, compared with other mill under dynamic conditions, such as the same yields by 10-20%, roller for material of ground pressure in high pressure under the action of the spring of 800-1200 kg.

Features & Characteristics

• Compared with other mill under dynamic conditions, such as the same yields by 10-20%, roller for material of ground pressure in high pressure under the action of the spring of 800-800 kg.
• Mohs' hardness scale is less than 9.3 on the Richter scale of mineral materials can be processed pieces.
• Finished product granularity range, the coarse particle size of 0.613 mm (30 eyes), particle size average 0.033 millimeters (425 mesh), a small number of the finest material can reach 0.013 mm (1000 mesh).
• Dust removal effect fully meets the national discharge standard.
• Analysis, easy to machine.
• Grinding device adopts superimposed multistage seal, sealed performance is good.

Operating Principle

1. Flour mill machine working process (the process of grinding material) : the big block material after broken jaw crusher to required size, the elevator will material sent to the storage hopper, then through vibrating feeder will feed the uniform quantitative continuously into the indoor host grinding of grinding, grinding powder after with the fan air flow away, the analysis machine grading, fineness powder varies with air flow through pipe into the big cyclone collector, separation collection, then through the powder discharge valve is the finished product powder. Air flow by the big cyclone collector top duct suction fan back. This machine the airflow is closed circulation system, and is in the condition of pressure circulating.

2. In grinding indoor by grinding material with certain water content, the abrasive grinding heat cause indoor gas evaporation changed the gas flow rate, and the pipe joint is not sealed, so that air is inhaled from the outside world, and circulate air volume increased, by adjusting ductwork between host and the fan to achieve the balance of air. Then lead redundant air to the bag-type dust remover and collect the fine powder from the redundant air which is discharged after purified.

Main Technical Data