Wider Viewing angle

        Enjoy Consistent Images from Any Perspective

        FW1019 uses an IPS panel, which provides a wide 178°/178° viewing angle and brightness output of up to 400nit. This means you'll be able to see accurate, consistent

        and bright images from any point of view.

 Innovation OSD operation

FW1019 not only set up five " F key" for waveform,vectorcope,color histogram,

peaking focus and so on. but also have " 3 group User Presets" ,reserves the

knob for professional users. Double functions and knob type coding switch are

FEELWORLD's exclusive technology feature, which will bring you more

convenient and rapid operate feeling.

Multiple Inputs and Outputs

Multiple input formats to meet all HD, SD, analogue video signal input and display demand Professional

functions set.The monitor comes with 2x3G HD-SDI, HDMI, Composite, and Component Input and

Ouput.

FW1019 has both HDMI SDI in and out,allowing it to not only display live signals, but also send them out

to other monitors simultaneously. It's the ability to display live picture on multiple displays at once while

still maintaining the original video.

FEATURES:

1.Seamless Switch   

2.Vetor scope   

3.Waveform

4.Color Histogram   

5.Histogram   

6.Peaking Focus Assist(red/green/blue/white outline)   

7.Camera 5D II Mode   

8.Check Field(Mono/Red/Green/Blue)   

9.Scan Mode   

10.False Color   

11.Exposure   

12.Squared segmentation(Zoom one of the images to realize full screen)   

13.Pixel-to-Pixel   

14.Mirror image(L/D,L/R)/Freeze   

15.Embedded Audio   

16.Zoom-in   

17.Ratio(4:3/16:9)   

18.Center Marker/screen Marker   

19.Color temp-adjust 

20.Markers(l6:9,4:3,2.35:1,1.85:1) with Red,Green,Blue,White,Gray,Black Color 

Waveform
 

This essential feature assists with the calibration of professional video cameras. It shows the overall brightness of the image assisting the video professional in correcting exposure. The waveform feature also checks the evenness of the lighting when lighting a chromakey or background.

Vectorscope
 

Vector scope shows how saturated the image is and where the pixels in the image land on the color spectrum. It can also be displayed in various sizes & positions, that allows users to monitor color gamut range in real time.

RGB Histogram
 

Color histogram is a graphical display of the distribution of tones, exposure conditions can visually display screen is divided into R, G, B three-channel independent display. Suitable for HD-SDI and HDMI signal monitoring

Histogram
 

The Brightness Histogram is a quantitative tool to check the picture brightness.The feature shows the distribution of brightness in an image as graph of brightness along the horizontalaxis(Left:Dark,Right:Bright)and a stack of the number of pixels at each level of brightness along the vertical axis

Peaking Focus Assist
 

The Peaking Filter used to aid the camera operator in obtaining the sharpest possible picture, which is most effective when the subject is properly exposed and contains enough contrast to be processed.FW1019's peaking focus have High-low to adjust.

False color

False color can be intuitive observation and calculation in the scene lighting levels,make brightness or lighting value mapping for the display brightness of false color, from the darkest to the brightest, in turn display  blue, cyan, green, yellow, orange and red.

False Color Key

To best utilize this feature, you must understand the color chart and have a basic understanding

of camera exposure. Normally, when shooting subjects like people, it is common practice to set

exposure of faces to the equivalent of approximately 56 IRE. The False Color filter will show this

area as the color PINK on the monitor.Therefore, as you increase exposure (open the IRIS), your

subject will change color as indicated on the chart: PINK, then GREY, then a few shades of

YELLOW. Overexposed subjects (above 101 IRE) on the monitor will be shown as RED. In

addition, underexposed subjects will show as DEEP-BLUE to DARK-BLUE, with clipped-blacks

indicated with a FUCHSIA-like color. Lastly, the color GREEN is used to indicate elements of the

image that are approximately 45 IRE. This represents a "neutral" or "mid-level" exposure commonly

used for objects (not people).     

Embedded Audio

The Audio Level Meters provide numerical indicators and headroom levels. It can generate accurate audio level displays to prevent errors during monitoring.

ACCESSORIES:
1.Mini HDMI Cable
2.Sun Shade
3.Hot Shoe Mount
4.Tally Adapter Kit
5.Battery Plate
6.10 inch U Type Bracket
7.Operation Manual