The Main Technical Parameters of The Machine

1  The oil cylinder:ID 360mm, the rod:Ф260mm , the effective trip: 6.5m,  pressure: 21Mpa,2 bars

The maximum thrust of the 2 cylinders:420 tons;   The working speed: 0—80cm/min ,

The max backward speed: 380cm/min.

2  The pump station:

63scy-plunger pump :2 set, 18.5KW  Motor:  2sets (the main working pump)

   PV2R13-23-116 double vane pump 1 set,15kw motor 1 set.

The hydraulic valve is integrated oil rout, hydraulic back fork gate. Automatic feeding.  an adjustable shelf (height and width) for the heating coils

3.  The frame for the machine body: 30# channel steel, welded  with 43kg steel   rail

4  The panel for the main engine: welded with 40-50mm medium steel sheet.

5  Distribution cabinets, operation box1set

6  Intermediate-frequency power (power 600KW  380v, 220v, 50/60Hz)

The scope of supply

A.  frame for the main engine: 1set, hydraulic pump station: 1 set, main cylinders 2 pieces,

front and back fork door:1 block each .

B．distributionbox1set, Controlling ark 1 set.

C.  feeding shelf: 1 set

D  Shelf for the heating coils :1 set

E.  other small cylinders 2 pieces

F  Intermediate-frequency electric ark: 1 piece,  reactor, capacitor: 1 set, 

G  water cable 500m㎡: 2 (L=3000mm)

K  Induction heating coils: For OD 820-530mm , 1D and 1.5D (8 pieces in total)

L  The equipment foundation drawing, hydraulic principle drawing, electrical diagram, machine drawing, manual operating instruction
 

Yanshancounty Fengliyuan Pipe Fittings Equipment ManufactureCo.,Ltd  (CN)