| Processing: | Storage Tank |
|---|
Quick Details
Specifications
Applications
(1) Life and fire fighting water supply system
(2) Architectural water storage tank, adjust the water tank, fire water tank, the expansion of the procurement system and condensed to water tank
(3) Boiler system of the supplementary water tank, heat preservation water tank.
(4) It can be used in water purification, water treatment
Feature of frp/smc water tank light weight:
(1) Strong resistance to corrosion.
(2) Reasonable structure design.
(3) All welded on-site combination. High strength, good sealing, prevent secondary pollution of water quality.
(4) Light weight, that is one half of ordinary steel plate water tank.
(5) Easy to install.
(6) Clean, bright, beautiful appearance.
Introduction of frp/smc water tank light weight:
1. Support for Panels: Longtime FRP Co. supply The panels whichare supported externally or internally by an adequate support system. External Reinforcement - Hot Dipped Galvanized Steel
Internal Reinforcement - Hot Dipped Galvanized or Stainless Steel 304 rod support and tie-rod
2. Sealing Materials: Non toxic Rubber foam to be used for all jointing, it is especially developed with long experience and technology on SMC products. It maintains soft itself and adhesives even at low temperatures
3. Bolts, nuts and washers for the assembly of panels: Exposed externally are hot dipped galvanized steel and in contact with water internally are hot dipped galvanized steel or stainless steel 304
4. Flange: the flanges for inlet, outlet, drainage, overflow are hot dipped galvanized steel or stainless steel 304
5. Ladders: SMC sectional tank of 1.5m depth or more shall be provided with internal ladder made up of materials same with the supports. The external ladders shall be galvanized mild steel or equivalent
6. Drainage: The dome shaped bottom panel with a concave drain panel facilitates complete and fast drainage. The concave drain panel has been designed to ensure the periodic cleaning and inspection of tank
7. Overflow Screens: it can be supplied with a screen overflow having a micro mesh filter
8. Man-hole opening & Inspection Hatches: the size can be customized; normally it is supplied with a standard size of:600 x 600mm. the opening can be designs of bolt, seal-tight locking arrangement
9. ABS roof vent with PE insect screen
10. Float level indicator, optional SS304 for internal and external support structure are available on request