Molybdenum sputtering target

1. Purity> =99.95% molybdenum

Other elements :< =0.05%

 Each element :< =0.01%

2. Density 10.2g/cm3

3. Certification: ISO9001:2008, ISO14001:2004, CE

4. Molybdenum material from .090 inches to 3 inches in thickness is classified as molybdenum plate.

5.Standard availability is described below. Other sizes and tolerances are available.

Thickness	Max. Width	Max. Length
.090"	24"	110"
.125"	24"	80"
.250"	24"	40"
.500"	24"	24"
>.500"	24"

For greater thickness, plate products are normally limited to 40 kilograms maximum weight per piece. Molybdenum Plate Standard Thickness Tolerance

Thickness	.25" to 6"	6" to 12"	12" to 24"
.090"	± .005"	± .005"	± .005"
> .125	± 4%	± 4%	± 4%

Molybdenum Plate Standard Width Tolerance

Thickness	.25" to 6"	6" to 12"	12" to 24"
.090"	± .031"	± .031"	± .031"
> .125	± .062"	± 062"	± 062"

6.Surface Condition

Surface can be supplied in a shiny, matte, or as-rolled condition; dependent upon thickness and width parameters.

7. Heat Treatment
Molybdenum flat products are rolled and annealed to provide the optimum condition for the desired end use.

8. Uses

Molybdenum plate are widely used in the construction of furnace tooling and parts and as a feed stock for the fabrication of parts for the electronics and semiconductor industries