Company Index on m.ecvv.com

Quick Details

Operating Temperature:	-10 ~ 75
Dissipation Power:	5w
Supply Voltage:	5v2a
Application:	Computer
Type:	Drive IC
Model Number:	Banana PI BPI-M1+
Brand Name:	sino or OEM
Place of Origin:	China (Mainland)

Specifications

banana pi BPI-M1+ single board computer
Type:    BPI-M1+

Compare Table:

M1 M1+ M2 RasPi 2

CPU A20,ARM Cortex-A7 Dual-Core A20,ARM Cortex-A7 Dual-Core A31S,ARM Cortex-A7 Quad-core Broadcom BCM2836 ARMv7 Quad-Core

DDR 1GB DDR3 1GB DDR3 1GB DDR3 1GB RAM

PMU AXP209 AXP209 AXP221s None

Power 5V @ 2A via MicroUSB 5V @ 2A via MicroUSB or 40 Pins Header 5V @ 2A via MicroUSB or 40 Pins Header 5V @ 1.8A via MicroUSB or 40 Pins Header

GPIO 26 Pins Header,18x GPIO;
8 Pins Header,4x GPIO 40 Pins Header,28x GPIO 40 Pins Header,28x GPIO 40 Pins Header,28x GPIO

Wifi Module None WiFi 802.11 b/g/n (AP 6181 module on board) WiFi 802.11 b/g/n (AP 6181 module on board) None

Ethernet 10/100/1000Mbps Ethernet 10/100/1000Mbps Ethernet 10/100/1000Mbps Ethernet 10/100Mbps Ethernet

On board Storage SD card,SATA 2.0 MicroSD (TF) card,SATA 2.0 MicroSD (TF) card MicroSD (TF) card

Display HDMI;
LVDS/RGB/CPU display interface;
CVBS HDMI;
LVDS/RGB/CPU display interface;
CVBS HDMI;
LVDS/RGB/CPU display interface; HDMI;
MIPI display interface;

USB 2x USB 2.0 host, 1 USB 2.0 OTG 2x USB 2.0 host, 1 USB 2.0 OTG 4x USB 2.0 host, 1 USB 2.0 OTG 4x USB 2.0 host

Buttons Reset button;
Power button;
U-boot button Reset button;
Power button;
U-boot button Power button;
U-boot button None

Leds Power status led (red);
User defined led1 (green) Power status led (red);
User defined led1 (green) Power status led (red);
User defined led1 (green);
User defined led2 (blue) Power status led (red);
User defined led1 (green);???

What's the Banana Pi M1+?

Banana PI M1+ is an updated version of Banana Pi M1 (BPI-M1).

Banana Pi M1+ is the open source hardware platform,Banana PI M1+ is an quad core version of Banana Pi ,Banana Pi M1+ is the quad core more better than the Banana Pi M1,it support WIFI onboard.

Banana Pi M1+ series run Android,Debian linux,Ubuntu linux, Raspberry Pi imange and others imange.

Elastos coordinate multi CUP to from the family cloud entirnment which based on the " software/hardware service"

Banana Pi M1+ hardware: 1Ghz ARM7 dual-core processor, 1GB DDR3 SDRAM,

Banana Pi M1+ with Gigabit ethernet port, It can run with Android 4.4 smoothly. The size of Banana Pi M1+ same as Banana Pi M1, it can easily run with the game it support 1080P high definition video output, the GPIO compatible with Raspberry Pi B+ and can run the ROM Image.

Hardware Specification of Banana PI M1+ (BPI-M1+)

  Soc

  Allwinner A20

  CPU

  ARM Cortex-A7 Dual-Core1GHz (ARM v7 instruction set)

  GPU

  Mali400MP2 Complies with OpenGL ES 2.0/1.1 (hardware acceleration support)

  SDRAM

  1GB DDR3 (shared with GPU)

  Power

5V/2A via MicroUSB (DC in Only) and/or MicroUSB (OTG)

  PMU

  AXP209

  Features

  Low-level   perpherials

  40 Pins Header,

  28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, CAN, I2S,   SPDIF,   LRADC, ADC, LINE-IN,FM-IN,HP-IN.

  On board   Network

  10/100/1000Mbps ethernet (Realtek RTL8211E/D)

  Wifi Module

  WiFi 802.11 b/g/n

  Bluetooth

  Optional

  On board   Storage

  MicroSD (TF) card,SATA 2.0

  Display

  Supports multi-channel HD display:

  HDMI 1.4 (Type A - full)

  LVDS/RGB/CPU display interface (DSI) for raw LCD panels

  Composite video (PAL and NTSC) (via 3.5 mm TRRS jack shared with audio out)

  11 HDMI resolutions from 640×480 to 1920×1080 plus various PAL and NTSC standards

  Video

  HD H.264 2160p video decoding

  Mutil-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc H.264 high profile   1080p@30fps or 720p@60fps encoding

  Audio outputs

  HDMI,analog audio (via 3.5 mm TRRS jack shared with composite video out),I2S audio (also potentially for   audio input)

  Camera

  Parallel 8-bit camera interface

  Audio input

  On board micphone

  USB

  2 USB 2.0 host, 1 USB 2.0 OTG (all direct from A20 chip)

  Buttons
  Reset button

  Power button

  U-boot button

Leds

  Power status led (red)

  User defined led1 (green)

  User defined led2 (blue)

  Other

  IR reciever

  Interface definition

  Sizes

  92 mm × 60mm

  Weight

  45g

	M1	M1+	M2	RasPi 2
CPU	A20,ARM Cortex-A7 Dual-Core	A20,ARM Cortex-A7 Dual-Core	A31S,ARM Cortex-A7 Quad-core	Broadcom BCM2836 ARMv7 Quad-Core
DDR	1GB DDR3	1GB DDR3	1GB DDR3	1GB RAM
PMU	AXP209	AXP209	AXP221s	None
Power	5V @ 2A via MicroUSB	5V @ 2A via MicroUSB or 40 Pins Header	5V @ 2A via MicroUSB or 40 Pins Header	5V @ 1.8A via MicroUSB or 40 Pins Header
GPIO	26 Pins Header,18x GPIO; 8 Pins Header,4x GPIO	40 Pins Header,28x GPIO	40 Pins Header,28x GPIO	40 Pins Header,28x GPIO
Wifi Module	None	WiFi 802.11 b/g/n (AP 6181 module on board)	WiFi 802.11 b/g/n (AP 6181 module on board)	None
Ethernet	10/100/1000Mbps Ethernet	10/100/1000Mbps Ethernet	10/100/1000Mbps Ethernet	10/100Mbps Ethernet
On board Storage	SD card,SATA 2.0	MicroSD (TF) card,SATA 2.0	MicroSD (TF) card	MicroSD (TF) card
Display	HDMI; LVDS/RGB/CPU display interface; CVBS	HDMI; LVDS/RGB/CPU display interface; CVBS	HDMI; LVDS/RGB/CPU display interface;	HDMI; MIPI display interface;
USB	2x USB 2.0 host, 1 USB 2.0 OTG	2x USB 2.0 host, 1 USB 2.0 OTG	4x USB 2.0 host, 1 USB 2.0 OTG	4x USB 2.0 host
Buttons	Reset button; Power button; U-boot button	Reset button; Power button; U-boot button	Power button; U-boot button	None
Leds	Power status led (red); User defined led1 (green)	Power status led (red); User defined led1 (green)	Power status led (red); User defined led1 (green); User defined led2 (blue)	Power status led (red); User defined led1 (green);???

Hardware Specification of Banana PI M1+ (BPI-M1+)
Soc	Allwinner A20
CPU	ARM Cortex-A7 Dual-Core1GHz (ARM v7 instruction set)
GPU	Mali400MP2 Complies with OpenGL ES 2.0/1.1 (hardware acceleration support)
SDRAM	1GB DDR3 (shared with GPU)
Power	5V/2A via MicroUSB (DC in Only) and/or MicroUSB (OTG)
PMU	AXP209
Features
Low-level perpherials	40 Pins Header, 28×GPIO, some of which can be used for specific functions including UART, I2C, SPI, PWM, CAN, I2S, SPDIF, LRADC, ADC, LINE-IN,FM-IN,HP-IN.
On board Network	10/100/1000Mbps ethernet (Realtek RTL8211E/D)
Wifi Module	WiFi 802.11 b/g/n
Bluetooth	Optional
On board Storage	MicroSD (TF) card,SATA 2.0
Display	Supports multi-channel HD display: HDMI 1.4 (Type A - full) LVDS/RGB/CPU display interface (DSI) for raw LCD panels Composite video (PAL and NTSC) (via 3.5 mm TRRS jack shared with audio out) 11 HDMI resolutions from 640×480 to 1920×1080 plus various PAL and NTSC standards
Video	HD H.264 2160p video decoding Mutil-format FHD video decoding, including Mpeg1/2, Mpeg4, H.263, H.264, etc H.264 high profile 1080p@30fps or 720p@60fps encoding
Audio outputs	HDMI,analog audio (via 3.5 mm TRRS jack shared with composite video out),I2S audio (also potentially for audio input)
Camera	Parallel 8-bit camera interface
Audio input	On board micphone
USB	2 USB 2.0 host, 1 USB 2.0 OTG (all direct from A20 chip)
Buttons	Reset button Power button U-boot button
Leds	Power status led (red) User defined led1 (green) User defined led2 (blue)
Other	IR reciever
Interface definition
Sizes		92 mm × 60mm
Weight		45g