Product introduction 
E-glass light weight chopped strand mats are an unwoven fabric consisting of randomly distributed chopped strands held together with emulsion binder.
Compatible Sizings and Applications
E-glass light weight chopped strand mat are compatible with unsaturated polyester,vinyl ester,epoxy resins.
The products are most widely used in automobile inner headliners with any width less than 3.2 meters.
Product Features
1. Uniform density ensures consistent fiberglass content and mechanical properties of the composites products.
2.Uniform powder distribution ensures good mat integrity,little loose fibers and small roll diameter.
3.Excellent flexibility ensures good moldability with no springback at sharp angles.
4. Fast and consistent wet-out speed in resins and rapid air lease reduce resin consumption and production cost and enhance productivity and mechanical properties of the end products.
5. The composite products have high dry and wet tensile strength and good transparency.
Technical specifications:
R2O Content: <0.8%
Filament diameter:11μm-13μm
Moisture:≤0.2%
Loss on Ignition:2%-9%
Binder Type: Emulsion
Compatible Resin: Polyester
Styrene Solubility <50seconds
Note:E-glass Chopped Strand Mats are available with a width range of 200mm~3600mm.Other specifications are also available on customer request.
Packaging&Storage
Each Chopped Strand Mat is wound onto a paper tube which has an inside diameter of 79mm.The mat roll is wrapped with plastic film,and then packed in a cardboard box.The roll can be vertically or horizontally placed.For transportation,the rolls can be loaded into a container directly or on pallets.
Unless otherwise specified,fiberglass products should be stored in a dry,cool and rain-proof area.
About Us

Our company is the professional manufacturer fiberglass chopped strand mat, and we have more than 15 years of experience and credibility.
Thank you for your browsing,and welcome your inquiry.