| Condition: | New |
|---|
Quick Details
Specifications
Application,widely used for hole drilling,taping and end face milling in the industries like,
Auto parts factory
CVT middle casings
Clutch casings
Air cylinder and its cover
EPS casings
Throttle valves
Starter casings
Rain wiper
Crankcase
Cylinder covers
Brake master cylinder
Electronics and relevant products
Cell phone frame,board and bumper
Laptop and pad frame and bumper
Watch & clock parts
Artificial organ
Metallic and plastic molds
College and institute teaching or new staff training
- The iron casting parts made of high performance HT250 cast iron,being through quenching treatment to eliminate the internal stress in purpose of anti-distortion.
- The foundation and table supports are completely all-in-one casting,ensures the machining center process stable and high rigidity.
- HIWIN linear guide ways originated from TAIWAN,fully support design guarantees reliable cutting,precise sliding and longer life.
- All axes' C3 grade precise double ball screw are treated by middle frequency heat treatment and pre-stretching to prevent heat warping,which improved the accuracy of positioning and repeatability.
- 100% mini CNC vertical machining center are examined by REINSHAW laser interferometer before departure as our policy.
- 3 axes AC servo motors,elastic metal splash guard covers.
- CNC controller,ISO programming,with functions of auto taping,fault detecting and alarm,power failure memory...etc.
- BT30 spindle taper,10 pcs capacity auto tools magazine.
- 2.2 kW servo spindle motor
- Manual pulse generator for easy operation.
- Balance block in the column for spindle smoothly vertical travel.
- Completely closed metal guard plates.
- Auto lubrication system
- Pneumatic tools pulling
- Integrated tank and pump for programmed / manual cutting fluid recycling.
- Pressure detecting and alarm
- Flushing nozzle for cooling and chip removal.
Mini vertical machining center model VMC330L and M320 specification
|
Parameters |
VMC330L |
M320 |
||||
|
Worktable size L(mm)×W(mm) |
690×210 |
550×160 |
||||
|
T-slot Nos-Width(mm)-Space(mm) |
3-16-63 |
3-12-42 |
||||
|
Max load(kg) |
100 |
60 |
||||
|
Stroke of Axis X(mm) |
330 |
320 |
||||
|
Stroke of Y(mm) |
220 |
170 |
||||
|
Stroke of Z(mm) |
320 |
270 |
||||
|
Spindle nose to table (mm) |
90-410 |
50-320 |
||||
|
Spindle nose to column (mm) |
280 |
185 |
||||
|
Spindle taper type |
BT30 |
BT30 or NT30 or R8 |
||||
|
Spindle speed (RPM) |
6000 or 8000 |
6000 |
||||
|
Spindle motor power (kW) |
2.2 |
1.5 |
||||
|
Feeding motors |
Torque of axis-X(N.M) |
3.3 |
3.3\4 |
|||
|
Torque of axis-Y(N.M) |
5 |
3.3\6 |
||||
|
Torque of axis-Z(N.M) |
5 |
3.3\6 |
||||
|
Installation size |
X Square 90×90/φ80 |
Square 90×90/φ 8010 |
||||
|
Rapid movement (m/min.) |
10 |
4 |
||||
|
Cutting feedrate (mm/min) |
1-4000 |
1-2000 |
||||
|
Ballscrew (Dia-mm/pitch of screw mm) |
20/5 |
16/5 |
||||
|
Width of linear slide X/Y/Z (mm) |
20 |
20 |
||||
|
Accuracy |
Positioning (mm) |
0.02 |
0.04 |
|||
|
Repeatability (mm) |
0.01 |
0.02 |
||||
|
Tool magazine |
BT30 umbrella type |
8 |
8 |
|||
|
Tool-to-tool time (sec) |
2.5-8 |
2.5-8 |
||||
|
Pneumatic pressure (Mpa) |
0.6 |
0.6 |
||||
|
Machine weight (kg) |
1600 |
1260 |
||||
|
Overall dimension :L×W×H(mm) |
1600×1630×2200 |
800 ×1020×1720 |
||||
|
CNC controller |
Siemens sinumerik 808D |
Siemens sinumerik 808D |
||||