| Condition: | New |
|---|
Quick Details
Specifications
Application,widely used for hole drilling,taping and end face milling in the industries like,
|
Auto parts factory
|
Electronics and relevant products |
Small molds and training |
|
CVT middle casings Clutch casings Air cylinder and its cover EPS casings Throttle valves Starter casings Rain wiper Crankcase Cylinder covers Brake master cylinder
|
Cell phone frame,board and bumper Laptop and pad frame and bumper Watch & clock parts Artificial organ
|
Metallic and plastic molds College and institute teaching or new staff training
|
l The iron casting parts made of high performance HT250 cast iron,being through quenching treatment to eliminate the internal stress in purpose of anti-distortion.
l The foundation and table supports are completely all-in-one casting,ensures the machining center process stable and high rigidity.
l HIWIN linear guide ways originated from TAIWAN,fully support design guarantees reliable cutting,precise sliding and longer life.
l All axes' C3 grade precise double ball screw are treated by middle frequency heat treatment and pre-stretching to prevent heat warping,which improved the accuracy of positioning and repeatability.
l 100% mini CNC vertical machining center are examined by REINSHAW laser interferometer before departure as our policy.
l 3 axes AC servo motors,elastic metal splash guard covers.
l CNC controller,ISO programming,with functions of auto taping,fault detecting and alarm,power failure memory...etc.
l BT30 spindle taper,10 pcs capacity auto tools magazine.
l 2.2 kW servo spindle motor
l Manual pulse generator for easy operation.
l Balance block in the column for spindle smoothly vertical travel.
l Completely closed metal guard plates.
l Auto lubrication system
l Pneumatic tools pulling
l Integrated tank and pump for programmed / manual cutting fluid recycling.
l Pressure detecting and alarm
l Flushing nozzle for cooling and chip removal.
Mini vertical CNC machining center VMC420L SPECIFICATION
|
Worktable Size |
800x260 mm |
|
T-slots Quantity-width-space |
5-16-50 |
|
Maximum Load of Worktable |
150 kg |
|
Travel of Axis-X |
410 mm |
|
Travel of Axis-Y |
260 mm |
|
Travel of Axis-Z |
410 mm |
|
Spindle Nose to Table |
70~480 mm |
|
Spindle Center to Column Rail |
315 mm |
|
Spindle Taper |
BT30 |
|
Maximum Spindle Speed |
8000 rpm |
|
Power of Spindle Motor |
2.2 Kw |
|
Rapid Feedrate |
10000 mm/min |
|
Cutting Feedrate |
1~4000 mm/min |
|
Ballscrews' Diameter/Space |
Axes-X,Y 20/5 mm Axis-Z 25/5 mm |
|
Width of Linear Guideways |
Axes-X,Y 20 mm Axis-Z 25 mm |
|
Positioning Accuracy |
0.02 mm |
|
Re-Positioning Accuracy |
0.01 mm |
|
Tools Magazine Capacity |
10 pcs |
|
Rapid Tools Changing Time |
2.5-8 sec |
|
Air Pressure |
0.6 MPa |
|
Power |
3-Ph 380V/50Hz |
|
Weight Total |
2200 kg |
|
Overall Dimensions |
1900x1400x2100 mm |
|
CNC Controller |
SIEMENS Sinumerik 808D milling |