Welding Manipulator/ Welding Center/ welding column and boom :

 

 

(1)Welding manipulator are used for the inside and outside circumferential and longitudinal welding.
(2)It mainly consists of column, boom, pedestal,ladder,electrical equipmet and hand control box. We also offer welding head and flux recovery system if customer require.
(2)There are three types for you to choose. Fixed type, Fixed with rotation type, movable type.
(3)Column can do both retracting (left and right) and lifting(up and down) movement to meet weld need.
(4)The speed of retracting are adjusted by Frequency Conversion Speed Control(VFD). It is precise and stable.
(5)Movable type cab be used with track together, to facilitate operation.
(6)Column and boom are often used with welding rotator and positioner together. (as show in following picture)
(7)Welding head and Flux recovery system are offered
(8)Hand-control box is offered to facilitate operation
(9)There is safty device.

 

 

This welding manipulator can be used in match with automatic welder, welding rotator (roller stand) or welding positioner (turing table), and for the inside and outside circumferential and longitudinal welding. It is also applicable to automatic welding of metal objects.

 

 

 

Model	NHCZ-1515
Power Input	3ph 380V AC 50/60Hz
Beam Lift Itinerary	1400mm
Beam Stretch Itinerary	1300mm
Beam Lift Speed	700mm/Min
Beam Stretch Speed	200-1500mm/Min
Beam Drive Mode	Inverter Motor +Ball Screw Drive
Head Level Fine-tuning Itinerary	100mm
Head Vertical Fine-tuning Itinerary	100mm
Head Adjustment Mode	Electrically Adjust
Control Mode	Hand Control Box Control
H*L* B Over Dimension H*L*B	2300*2200*620mm
Remark :This machine set the switch interface aside peripheral equipment , can be composed and linkage with welding positioner , turning rolls and welding power , can achieve automatic welding for the girth and straight of the inside and the outside of the cylinder or other metal structure .