Spray Booth Truck Diesel Burner TG-18-50

Inside dimension

18000×5000×5000mm(L×W×H)

Outside dimension

18144×6896×5600mm(L×W×H)

Wall panel

Profiled bar beams in the roof to strengthen the room body; wall panel thickness: 70mm, width: 710mm, tongue and groove structure, with. EPS insulation inside, colour: white.

Doors

Main door: Folding door, 4 folds, 4000×4500mm(W×H),with galvanized steel frame, with polystyrene(EPS) inside, color: blue Escape door: 2 units, 800x2000mm(W×H) /PC, colour: white.

Basement

without basement, 2 rows of pits in the ground for exhaust air, dimension of each pit is 16100×760mm(L×W), with galvanized grilles made by twisted steel and flat bar above.

Intake air system

6×5.5KW double-intake centrifugal fans for intake air,Model YDW4.5S, total air capacity: 93000m3/h

Exhaust air system

3×11KW double-intake centrifugal fans for exhaust air, with motor outside, belt-drive, model TAE-630H, Total air capacity: 84000m3/h.

Damper actuates

Pneumatic damper actuates from spraying to baking cycle, manual dampers for exhaust air

Heating system

3 units RIELLO RG5S diesel burners, stainless steel heat exchanger, Max. Heating productivity: 780000 Kcal/h, Max. Work temperature: 80℃

Filter system

Pre-filter, ceiling filter, exhaust fibreglass filter, activated carbon filter.

Filtering area

75M2

Lighting system

Ceiling Lights: 24Units×4Pcs=96Pcs×36W, Side Lights: 28Units×4Pcs=112Pcs×36W,

with electronic ballasts, up and down interleaving installation.

Control system

Spraying, heat spraying, baking, baking, time setting, lighting switch, failure indicator, thermostat, power supply switch, emergency stop, ampere meter, voltmeter, hours meter, temperature limit controller, pressure gauge. Exhaust reduction voltage motor start

Total power

75.5KW