|
Standards :
|
|
SUNNIK SMC Sectional Panel Tank constructed with bolted SMC panels by hot compression molding process conform to SS 245: 1995, BS EN 13280:2001, GB 5749-85 and JC 658.1-1997
|
|
|
|
Composition :
|
|
SMC panel is basically produced with unsaturated polyester resin conforming to BS3532: 1990 and glass fiber type 'E' conforming to BS3691: 1990
|
|
|
|
Dimensions :
|
|
Nominal external size of unit panels shall be 1M x 1M x 1M x 0.5M with combined double flange at an angle of 45° & 90° to the panel face on all four sides with pre-drilled bolt holes. Specifications conforming to BS 1564: 1975
|
|
|
|
Anti-skid for safety :
|
|
Panels for external tank top covers and internal surface of base are anti-skid with protruded studs for safety during installation and maintenance
|
|
|
|
Manhole & Air vent :
|
|
Eachsectional panel tank compartment shall be provided with 600mm square access manhole opening and insect proof air vent to maintain water at atmospheric pressure
|
|
|
|
Reinforcement :
|
|
The SMC sectional panel tank is supported either with external or internal steel reinforcements. All internal reinforcements that are in contact with water shall be of stainless steel type whereas those with no contact with water shall be of hot dipped galvanized type.
|
|
|
|
Bolts, Nuts & Washer :
|
|
All bolts & nuts in contact with water shall be Stainless Steel and whereas those not in contact with water shall be hot dipped galvanized type to ISO 1461 for exposed tank (Zinc plated bolts & nuts for enclosed indoor tank).
|
|
|
|
Sealant Materials :
|
|
Non-toxic PVC sealant strips and butyl putty gum are supplied to panel joints for water tightness, weather and insect proof.
|
|
|
|
Ladders & Indicators :
|
|
Internal aluminum ladder, external galvanized ladder and MS mechanical (ruler type) indirect reading level indicator c/w PVC float, cable & pointer caliberated in meter are supplied to suit tank height.
|
|
|
|
MS Skid Base :
|
|
Mild Steel (BS 4360:1990 Grade 43A) primer coated skid base shall be provided to support tank on top of existing R.C. plinth at 1.0M center to center for leverage and distribution of load (Galvanized skid base can be supplied as an option)
|
|
|
|
Notes:
- Manufacturing specifications are subject to change without prior notice.
- Manufacturing specifications can be customized but subject to manufacturer's approval and safety
standards.
- It is recommended all SUNNIK Sectional Panel Tank shall be installed by our approved installers only
- All pipes nozzles connection openings can be customized prior to delivery. Pipe, valves and its fitting should
have their own support and flexible joints at tank connections to prevent loading and stress to tank.
- Service temperature of water shall be at ambient temperature
- For safety reason, please seek manufacturer's advice on other liquid containment or higher liquid
temperature
|
|
For further inquiries, please do not hestitate to contact us!
