|
GLZ-125A~1600A change over load isolation switch
|
|
1
|
GLZ-125A~1600A.The load isolation switch is suitable for the change-over of two sets of low voltage electric circuit or the change-over of 2 set of load devices or safety isolation.
|
|
2
|
Mode of operation:
|
|
Direct operation: handle is installed on the switch.
|
|
Operation outside the board: handle is installed outside the door of power distributing board
|
|
3
|
Products with observation windows can be provided according to the demand to observe directly the ON and OFF state of contact.
|
|
4
|
The products have three poles,four poles, and(three pole+ON and OFF neural pole).
|
|
5
|
Extended shate is used for there operation outside the board.
|
|
6
|
Two sets of auxiliary contacts can be assembled according to the demand.
|
|
7
|
Mechanical performance and electric property correspond to the mechanical performance and electric property of HGL-125A-1600A.
|
|
8
|
A bridge can provided to connect the inlet or outlet terminal of the switch.
|
|
9
|
the electric cable insulating cover can be assembled
|
|
Note
|
The bridge connection is chosen, an explanation is needed to indicate there indicate the inlet or outlet connected with it
|
