Line Array Element
|
|
Frequency Range(-10dB):
|
48Hz-18kHz
|
Frequency Response(±3dB):
|
60Hz-16kHz
|
Horizontal Coverage Angle(-6dB):
|
90°nominal ( 250Hz – 16K Hz )
|
Vertical Coverage Angle (-6dB):
|
Varies with array size and configuration.
|
System Input Power Rating:
|
LF: 2000W Continuous.8000WPeak(AES/2 hour)
|
|
MF: 600W Continuous. 2400W Peak (AES/2 hour)
|
|
HF: 150W Continuous. 600WPeak (AES/2 hour)
|
Maximum Peak Output :
|
138 to 146dB SPL,1m(frequency/bandpass dependent)
|
Recommended Amplification:
|
LF: 2 x 1000 -2000W into 8 ohms
|
|
(2 x LF transducers powered independently )
|
|
HF: 600 – 1200W into 8 ohms.
|
|
HF: 300 – 600W into 16 ohms.
|
Transducer Sections
|
|
Low Frequency:
|
Two 12inch woofer with76mmdual voice coil.
|
Bandpass nominal Impedance:
|
2 x 8 ohms (LF transducers wired individually)
|
Input Power Rating (eachdriver):
|
2 x 1000W Continuous, 2 x 4000W Peak (AES / 2 Hour)
|
|
2 x 700W Continuous, 2 x 2800W Peak (100 hour)
|
Bandpass Sensitivity:
|
98 dB, 1W/1M(2.83 Vrms at3.3ft)
|
Mid Frequency:
|
Four 6inch woofer with50mmvoice coil.
|
Bandpass nominalImpedance:
|
8 ohm (MF transducers wired in series parallel )
|
Input Power Rating:
|
600W Continuous,2400WPeak(AES / 2 Hour)
|
|
400W Continuous,1600WPeak(100 hour)
|
Bandpass Sensitivity:
|
102 dB, 1W/1M(2.83 Vrms at3.3ft)
|
Hight Frequency:
|
Two Neodymium compression driver with76mmvoice coil.
|
Bandpass nominalImpedance:
|
16 ohms (HF transducers wired in series )
|
Input Power Rating:
|
150W Continuous,600WPeak(AES / 2 Hour)
|
Bandpass Sensitivity:
|
114 dB, 1W/1M (2.83 Vrms at 3.3ft
|
Physical Data
|
|
Dimensions (W x H x D):
|
990.6 x 355.6 x 508mm
|
Weight (net):
|
51kg
|
Connectors:
|
Neutrik Speakon NL-8 (x 2). Pins 1+/- & 2+/- for Lows,
|
|
Pins 3+/- for Mids, Pin 4+/- for Highs.
|
Material:
|
18mm, 11-ply birch plywood
|
Finish:
|
Black DuralFlex finish
|
Grill:
|
Power coated, black, 16-guage perforated steel
|
|
with acoustically transparent foam.
|
Rigging:
|
Steel with dual coating zinc and polyester powder.
|