Drum-type pulp moulding machine primary comes from Europe,our company fetch in advantage technic boldly in the middle of nineties ,it gets good commentary from profession's internal as a result of its exceellent performance characteristic. On the basis of it ,our company develop and exploit products which apply to developing country .It has got good comments from customer since we lunches into market.It has higher output and better dehydraulic than reciprocating forming machine which made in China .(produce cycle is 6-7times longer than reciprocating,containing water less 20%-30%) 

Pulping system

Main equipments:pulper,3m3,55kw;;vibration screen,1.8m2,4kw; consistency controller;mixer;

pulp pump,water pump,control cabinet for pulping system,etc.

Forming system

Consist of 12 pcs of forming platens and 1pc of transfering platen. Platen size:1600*400mm.

4pcs of 30-cell egg tray molds can be mounted on each forming platen(4pcs/cycle). There

are 48pcs of forming molds and 4pcs of transfering molds in total. Forming efficiency :16-18

cycles/min;equiped with vacuum auto drain system,auto cleaning system for the forming

mold, preheating system and auto control cabinet.

Drying system 

Outline dimension:21000×2120×4200mm;6 layer conveying chain; heated concentratedly;

 one burner with French or Italian brand. The energy for option: LPG,GAS,diesel oil. Equiped

with auto control cabinet.

Stacking system

The finsihed products will be counted and stacked automatically after drying.

Height Limit Pressor

It will press and make the products more compact after stacking so that storing and

transporting will be more convenient and cost-effective .

Subsidary  Equipments

Vacuum pump,90kw,1set; air compressing system: air compressor syetem(37kw,1set),

air dryer,air filter and air storage tank.