Manufacturers of Permanent Magnet(PM) Stepper Motor:

With different diameter: 8mm, 10mm, 15mm, 20mm, 25mm, 35mm, 42mm, 55mm

Good quality & Factory price

 

 

Application :

HVAC/R    Valve Actuation

Office Automation    Printers, Copiers, Data storage

Medical Applications    Pill dispensing    Analysers

Telecommunication    Antennae positioning    Switching lines

Other Industries & Applications     Robotics

 

Highlights :

 

Excellent open loop control - No encoders necessary

Digitally controlled - Easy to use with a micro processor

Cost effective - compact design, lower integration cost

Maintenance free - motor is brushless

Winding possibilities - Bipolar

 

General Specification :

 

Item	Specification
Step Angle Accuracy	±8%(full   step, no load)
Resistance Tolerance	±10%
Inductance Tolerance	±20%
Temperature Rise	80.C Max.(rated current,2   phase on)
Ambient Temperature	-20.C~+50.C
Insulation   Resistance	100MΩMin.   ,500VDC
Dielectric Strength	600VAC   , 1s , 3mA

 

Specification

 

Model No.	Voltage(V DC)	No. of Phase	Step Angle (Deg.)	Gear Ratio	Winding Resistance(Ω)	Max. Pull-in Rate(PPS)	Pull-in Torque ()	Figure
PG15S-020-01/20	5	2	18/20	1:20	30	800	60 (at 350PPS)	1
PG15S-020-01/50	5	2	18/50	1:50	30	800	270(at 350PPS)	1
PG15S-020-90/50	5	2	18/50	1:50	30	800	300(at 500PPS)	2
PG15S-020-134/100	12	2	18/100	1:100	60	1100	500(at 350PPS)	3
PG15S-020-122/210	5	2	18/210	1:210	10	1100	1200(at 500PPS)	4
PG15S-020-90/298	5	2	18/298	1:298	30	800	1000(at 300PPS)	1
PG15S-020-111/380	5	2	18/380	1:380	10	1100	2500	4

 

 

 

Customization On Call

Coil Modifications - Resistance and Inductance.

Magnets - to yield higher linear force or reduced detent levels.

Higher Strength Plastics for higher impact forces.

Reduced or increased Detent Force to suit the application.

Screw  - metric or imperial tips, length.

Special Flanges, Connectors.

Wire Harness - connectors, pins, lead length, shrink tubing.