YOKOGAWA EJA510A Absolute and Gauge Pressure Transmitter

EJA510A and EJA530A can be used to measure liquid, gas, or steam pressure. Both output a 4 to 20 mA DC signal corresponding to the measured pressure,and also feature remote setup and monitoring through communications with the BRAIN? terminal and CENTUM CS? or μXL? or HART? 275 host.

Specification:

		EJA510A / EJA530A Direct Mount Type Absolute Pressure and Gauge Pressure Transmitter (Measurement values below are in absolute for EJA510A)
		A Capsule	B Capsule	C Capsule	D Capsule
Range		0 to 200 kPa (0 to 29 psi)	0 to 2 MPa (0 to 290 psi)	0 to 10 MPa (0 to 1450 psi)	0 to 50 MPa (0 to 7200 psi)
Span		10 to 200 kPa (1.45 to 29 psi)	0.1 to 2 MPa (14.5 to 290 psi)	0.5 to 10 MPa (72.5 to 1450 psi)	5 to 50 MPa (720 to 7200 psi)
Accuracy		±0.2%	±0.2%	±0.2%	±0.2%
Degrees of protection		IP67, NEMA 4X, and JIS C0920 immersion proof
Certificates		FM, CENELEC ATEX, CSA, IECEx
Output		4 to 20 mA DC or FOUNDATION? fieldbus or PROFIBUS PA 2-wire system with digital communication
Supply voltage		BRAIN and HART:10.5 to 42 V DC (10.5 to 30 V DC for Intrinsically safe type) Fieldbus:9 to 32 V DC (9 to 24 V DC for Entity model and 9 to 17.5 V DC for FISCO model)
Ambient temperature		-40 to 85 deg C (-40 to 185 deg F) (general use type) -30 to 80 deg C (-22 to 176 deg F) (with integral indicator)
Process temperature		-40 to 120 deg C (-40 to 248 deg F) (general use type)
Maximum overpressure		4 MPa (580 psi)	4 MPa (580 psi)	20 MPa (2900 psi)	60 MPa (8500 psi)
Mounting		Direct Mounting/2-inch pipe mounting
Wetted parts material	Capsule	Hastelloy C-276
	Process connection	SUS316L, Hastelloy C-276
Housing		Cast aluminum