Product Main

Quick Details

Properties: Other
Model Number: snow wolf 01
Brand Name: Aiker
Place of Origin: China (Mainland)
chip: GX200 chip
batteries: 2 x 18650 batteries
Wattage: 5 - 200W
Voltage output: 0.5 - 7 Volt
Resistances: 0.05 - 2.5 Ohm
Quality: High

Specifications

Aiker  Temperature Control Snow wolf 200W Box Mod 


There's ordinary e-cigarettes. Then there's powerful e-cigarettes. Then there's very powerful e-cigarettes, and then there's the few that simply blows the scale all together. 

  • Variable Wattage from 5 - 200W. 
  • GX 200 smartchip
  • Temperature control: 100 - 350 C / 212 - 662 F up to 70W
  • Automatic switch between Wattage and Temperature mode by detecting which coil is used.
  • Will run resistances from 0.05 - 2.5 Ohm.

We at the Mule don't claim to be experts on wildlife or nature in general but let's just say that if the real snow wolf is half as brutal as this namesake, then we'll not be going out to play in the snow for the foreseeable future!

Powerful. Very very powerful:


The Snowwolf 200W is not just High End. It's High Power too.
200 Watts in a e-cigarette? That's simply insane!
We live in a world where we recommend people to buy a 30W Mod "because SubOhm requires a lot of power". Comparing a 30W iStick to a this 200W devil, is like comparing a sports car to a supersonic fighterjet!
When it comes to SubOhm the Snowwolf will allow you to go from 0.05 - 2.5 Ohm. That means plunging deeper into the SubOhm experience than you've ever done before.
All this power is generated by two 18650 batteries.

*Please note that the batteries have to be the same brand/type and with the same charge/current.

Wattage Control:


The Snowwolf 200W will go as far as 200W in Wattage mode. The increments are 0.1W from 5 - 50W, 0.4W between 50 - 100W and 1.0W from 100 to 200W.
The Snowwolf is not a pulse-Mod but will switch to pulse mode from 150 - 200W. This has no infuence on the performance.

Temperature Control:


The Temperature Mode will run from 100 - 350° Celcius / 212 - 662° Farenheit up to a maximum of 70W.
The Snowwolf will automatically switch between Wattage and Temperature Mode by detecting which wire your coil is made from. You can switch manually by pressing both adjustment buttons simultaniously.
To switch between Celcius and Farenheit simply turn the temperature down to minimum and it will switch automatically.

Construction and design:


As you can see on the pictures the Snowwolf 200W is constructed around a solid steel frame and has glass panels on both the front and back. This gives it a nice tactile feeling, a bit like a High End mobile phone, and beautifully undelines the exclusivity of the Mod.
The back panel is the battery lid and changing the batteries is easy as it is held securely in place by magnets. So no need to bring the tool box.
The Firebutton and the adjustment buttons are made from steel and have a nice responsiveness.
The bright OLED screen keep you informed about: Voltage, Wattage, temperature, battery life and even the Ohm of your coil.
The springloaded 510 centrepin ensures that any tank/atomizer will get a perfect connection.

The bottom line:


Choosing a Mod like the Snowwolf 200W means handling an enormous amount of Vape-power. While this may sound enticing for many, the fact is that this is NOT a Mod for the newbie vaper! Wattage at this level can do a lot of damage to you and/or your equipment if handled incorrectly. It is also a Mod with a lot of advanced features that requires a great deal of knowledge to use.
Again: This is not a newbie e-cigarette/Mod!
However, if you are an experienced vaper and would like to arm wrestle with thebiggest, baddest boy on the block, then The Snowwolf 200W is the Mod for you!

 

 Features:

  • GX200 chip
  • Frame made of steel. Front and back panels made of glass.
  • Engraving on side of Mod.
  • Springloaded 510 connector pin for perfect fit with any 510 atomizer/tank.
  • Powered by 2 x 18650 batteries (minimun 30A)
  • Variable Wattage from 5 - 200W.
  • Voltage output from 0.5 - 7 Volt.
  • Temperature control from 100 - 350° C / 212 - 662° F
  • Will run resistances from 0.05 - 2.5 Ohm.
  • Automatic switch between Wattage and Temperature mode by detecting which coil is used.
  • 5 click on/off
  • Automatic lock after 30 minutes of no activity.
  • 10 second automatic cut off
  • Bright OLED screen.
  • Low Ohm/resistance protection.
  • Short circuit protection.
  • Reverse battery protection
  • Over heat protection.
  • User maual
  • Measurements: 100mm x 52mm x 25mm.