(Engineering Machinery with High Strength Wear Resistant Steel Plates  ) 
-NM500

NM500 Wear resisting steel adopt the first Word Pinyin NaiMo and its HBW value to name the grade; 500-Show the average
brinell hardness of steel plate

1.NM500 belong to low alloy wear resistant steel

2.Named: NM500.

3.NM500 its average HBW is 500

(International Stipulation Range of HBW: ≥470).

4.The Delivery Status NM500: Qunched and Tempered .

5.Steel Plate size, Shape, Weight and allowable Deviation: should comply with the provisions of GB/T709.

6.Steel Surface Quality: conform to GB/T 3274;

7.The provisions of this standard and acceptance inspection items of the reinspection rules shall comply with the provisions of
GB/T 17505.

8.Rolled Range: 3-80mm(Other thickness two sides negotiate)

9.Chemical and Mechamical Property: as following Table

 

 

NM500 Chemical Property

GRADE

Chemical Property(Quality Percent)/%

C

Si

Mn

P

S

Cr

Ni

Mo

Ti

Bta

AIs

CEV

≤

≥

≤

NM500

0.38

0.70

1.70

0.020

0.010

1.20

1．00

0.65

0.050

0.0005~0.006

0.010

0.65

a Bt stands for Boron content.

NM500 Mechamical Property

GRADE	THICK mm	TENSIBLE STRENGTH Rm  MP a	YIELD STRENGTH A50 %	—20℃ IMPACT TEST AKv / J	HBW
NM500	3~70	--	--	--	≥470
Tensile strength, elongation and impact energy as the special requirements of performance, such as customer did not indicate in the contract, the only guarantee the brinell hardness.

1.Specification :

         Thickness(mm)*Width(mm)*Length(mm)

            5-350*1500-4500*3000-27000

2.Executive Standard :

GB/ ASTM /ASME/ JIS /DIN /BS /EN /ISO/Caterpillar/ABS

3.HeatTreatment:

        Normalized  Tempered  Annealed  Controlled-Rolled

     Normalized+Tempered  Quenched and Tempered   As Hot Rolled

4.Z performance:                                                                                          

         Z15, Z25, Z35

5.Flaw Detection:

           JB/T 4730-I/II/III/IV  GB/T 2970-I/II/III/IV  EN10160-S2E3/S3E4  SEL 072-I                                             

           JISG0801   SEL072-II   A578C/B/A  A435  and Etc.   

6.Delivery Time :

 Normally within 30 days 
                                                                                                 

7.Terms of Payment : T/T OR L/C      (Specific Order Specific Analysis)