2015 hot selling silicone phone case making machine             

 

      

 

1,working table:keep worm function,it's very high speed to fill the mold (dispensing faster)

 

2,3D XYZ axes screw slide:use the Taiwan shangyin in original brand.full mobility,dispensing

broader.

 

4,dispensing solenoid valve:control the circuit,to ensure the normal operation of the dispensing

machine

 

3,servomotor:control dispensing position,make dispensing more accurate.

 

5,dispensing valve:can control the dispensing flow.

 

6,cylinder solenoid valve:control the hydraulic flow direction.

 

 

Technical parameters:

 

 silicone phone case making machine machine advantage and operation:

 

1.Labor saving, improve the production efficiency, one automatic dispensing machine can replace

 4-6 skilled workers, one worker can operates several sets machines, greatly saving labors, some 

works can do as dozens of workload, cut down the production phase. Solve the problems of labor 

shortage, more hard for practiced hand, hard manage, plant cover large, high input cost. 

 

2.Special software, easy operation, multi-needles multi-colors, dropping accuracy. 8-12 colors(can extensible to 16 needles), multi needles can dispensing at the same time.

 

3.High precision, fast and liquidity walk in arc, three-dimensional. Coordinated system control, the precision can be 0.01mm, the products it produced

 is very stabilized, the products present of pass can over 99.9%, can improve the working efficiency

 200-800%.

 

4.High stability: adopts CNC engraving machine rack construction technology, the materials adopts 

cast iron and granite, the rack will not be out of shape in 5-8 years, adopts origional imported screw rod,

 electrical equipment, moving stability and reliable, low failure rate.

 

5.Automatic dispensing machine operation guideline: to make the dispensing machine working in high 

efficiency, must do as follows: 

(1) worker: using our dispensing machine, is to liberation the workers out of the boring and repeat 

dispensing training part.

(2) The workers main job is changed from dispensing and drying mold to control the machine production.

 The workers just need careful, strong sense of responsibility, the workers can take up their squires after

 training 2 or 3 days. But training to be a skilled dropping worker, it need 1-3 months.

 

6.Dispensing machine can undertake repeating pinpoint dispensing work. When it is in regular production, 

the dispensing needles do not connect with the molds, the distance to the molds is adjustable as you need, 

the dispensing speed is adjustable, dispensing quantity adjustable, do not need repair and clean the molds,

 at the same time replenish the bed materials, the thickness is the same, do not need repair.   

 

7.Must bring a clean filter materials, if the materials is not clean, it will make the needle blocking, influence

 the speed. Just with suitable viscosity, string well distributed, clean and healthful pvc materials, can make

 sure the dispensing machine continuation and  efficiency production.

 

8.The molds need balance at four sides, the same thickness, clean and healthy. In a word, how to use 

the dispensing machine is depend on the operators, only make the good operate in each steps, the

 machine can express its largest advantage, so create highest profit.

 

Application of  silicone phone case making machine:

 

The silicone phone case making machine is aplied for dispensing the label, bracelet, trademark,

mobile phone case, mobile phone button, coil and speaker outerring etc. We can modify and customize carious dispensing machine as customer required, and add special software function for the machine.

 

 Related machines:

 

1.Maxing the pigments and liquid silicone by using the stirring machine ,in order to get the mixture ,

at the same time, put the pigments and solid silicone into the gum machine, for getting the mixture ,

too.

2,liquid and  solid silicone and pigments had mixed ,and the liquid silicone need to vacuum, and the

solid silicone need to use the cutting machine .

3,filling the mold with liquid silicone by dispensing machine (the logo of the mold  can design by

yourself),and then need to use the vacuum machine to deflate.

4,put the solid silicone into the mold (with filled by liquid silicone).

5,put  the mold into the hydraulic machine to press about 1min(adjustable),the working principle

is thermoforming.

6,finally, just open the mold and finish the phone case,put the mold to the automatic cooling

table.