Features:

1, This product is a new type polymer modified adhesive.

2, High thixotropy, easy to operate, can finish pasting, caulking and waterproofing at a time, time-saving and shortcut.

3, Good anti-water and anti-aging function.

4, Non-toxic, environmental-friendly product.

5, Good anti-infiltration function.

Application scope: 

Mainly used for pasting all kinds of paper tiles, mosaic and lath bricks.

Surface preparation: 

1, The substrate surface should be firm, dry and clean, no grease, no wax, or other loose materials.

2, The substrate should have certain surface strength, and basic smoothness and verticality.

Application:

1, Ratio: adhesive:water=3.3:1. Stirring them into uniform paste. Put it aside for 2~3 minutes and then a little stirring to gain a better effect.

2,Using a tooth scraper to scrap the adhesive on the working surface, control within 1㎡, and pressing the adhesive in the back seam of the paper tiles and mosaic, then pasting the mosaic tile on the surface.

Items	Technical reference
Coverage area differs according to circumstance	Adjust Time (min)	≥5
	Open Time (min)	≥10
Using 3×3mm tooth scraper about 1.5~1.8kg/㎡	Surface Drying Time	About 2h
	Appearance	White powder
The above-mentioned dosages are recommended for the even substrate.	Shrinkage %	≦0.50%
	Normal Shear Strength	≥ 1.0MPa
	Water Resistance Shear Strength	≥0.7MPa
	Temperature Resistance Shear Strength	≥0.7MPa
	Freezing and Thawing Resistance Shear Strength	≥0.7MPa

Cautions:

1, Check the substrate before operation.

2, Operating under 5℃~40℃.

3, Wet the surface when the base temperature is too high (40℃) in summer to avoid the water lossing too fast and effecting the operation quality.

4, Never mix the dry slurry with water for second use.

5,Clean the tile surface with wet cloth 1~2 hours after finished operating.

6,Can do other operation 24h after finished operating.

Store method: 

Store in cool and dry place, unopened product can be saved for one year.

 

Packing :

20kg/bag