1,Punching Station 

The large punch bed area has a removable front block and is designed to give a very wide range of punching applications. A punch table with rules and guides for repetition work are fitted as standard machine.

2,Section cutting station

The machines are fitted as standard with blades for cutting round and square bars. With extra device, the machines are able to cut, in this aperture, channel, joist, T-section and many other special profiles.

3,Angle station

This station provides large capacity angle cutting at 90° and 45°. Angles between 45° and 90° can be achieved by first cutting at 90° and then flange trimming to the required angle in the shearing station.

4,Shearing Station

The shearing unit is fitted with a simple robust holddown which is adjustable to any thickness of material within the cutting capacity of the machine. The shear feed table with adjustable guides is fitted to allow accurate feeding of materials. The guide can be adjusted to allow mitre cutting up to 45° for  flat bars or to trim the flangles of angle.

5,Notching Station

The notching station is fitted as standard with a rectangular notch table with adjustable back stops, allowing repetitive positioning.

Two shielded foot controls

For two operator utilisation, the hydraulic system is activated by two shielded foot controls,one operating the punch end cylinder, the other operating the shear end cylinder. The shear cylinder provides the power to the three shearing and the notch stations.

Low maintenance

The system gives accurate power inching at all five work stations and allows the machine to be stopped at any position giving safe and accurate tool setting and work positioning. Limit switches at both ends of the machine control stroke length at all stations. Centralised lubrication is metered by one-shot system, being only one feature of the low maintenance requirement.

Model	MULTI   60	MULTI 70	MULTI 80	MULTI 95	MULTI 125	MULTI 175
RATED CAPACITY	60T	70T	80T	95T	125T	175T
PUNCHING
Hole Punching(D x T)	28x15	26X20	28X20	27X25	32X25	40X32
Max. hole punching(D x T)	57x8	57X9	57X10	57X12	57X16	57X22
Stroke	55	55	55	80	80	80
Standard depth of throat	305	305	305	355	355	625
Extend depth of throat	625	625	625	625	625	625
Max. hole size	57	57	57	57	57	57
Max. hole size	160	160	160	160	225	225
Max. section steel	305	305	305	305	305	380
SHEARING
Max. thickness for plate	230X20	300X20	300X20	380X20	380X25	380X30
Max. width for plate	375X10	375X15	450X15	480X15	600X15	600X20
Cut corner in angle steel, Max. 45 degree	100X15	100X15	100X15	120X15	120X15	125X15
ANGLE CUTTING
90°	130X13	130X13	150X13	150X15	150X18	200X20
45°	70X10	70X10	70X10	80X10	80X10	80X10
SECTION CUTTING
Round steel/Square steel	45	45	45	50	55	65/55
Channel steel/H steel	130X65	130X65	130X65	160X90	200X100	200X100
T steel*	90X12	90X12	90X12	100X12	120X12	150X15
NOTCHING
Plate thickness	10	10	12	12	12	16
Width-rectangle	45	45	40	52	60	60
Depth-rectangle	90	90	90	100	100	100
Depth-V shape	60	60	60	70	80	80
Cut edge	100X10	100X10	100X10	100X13	100X13	100X14
CONER NOTCH
Max. corner cutting ability	250X6	250X6	250X6	250X6	250X6	250X6
TUBE NOTCH
Max. outside diameter for tube	83	83	83	108	108	165
BENDING
flat steel bending	250X12	250X13	250X13	250X20	250X22	250X25
plate bending	500X3	500X3	500X3	500X3	700X3	700X4
PUNCHING AT NOTCH STATION
Depth	125	125	125	125	125	125
Max. ability	38X7	38X8	38X8	38X10	38X12	38X13
TECHNICAL DATA
Power for main motor	5.5	5.5	7.5	7.5	7.5
Net weight for machine	1570	1620	1925	2730	3100	5550
Machine size (L x W x H cm)	164X71X178	164X71X180	190X79X191	190X79X191	200X80X203	270X2X216